2 open source boards using the MIC5365-1.2YC5
Real designs built with the MIC5365-1.2YC5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGATinyFPGA-B-Series
tinyfpga
17.8 × 35.6 mm34 parts2LGPL-3.0201
FPGAFidget
transistorfet
110 × 100 mm98 parts4LGPL-3.04
The MIC5365-1.2YC5 in open source designs
The gallery holds 2 open source boards using the MIC5365-1.2YC5 from 2 GitHub repositories; a typical one measures about 63.9 × 67.8 mm and carries around 66 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is TinyFPGA-B-Series by tinyfpga.
Microcontrollers on boards using the MIC5365-1.2YC5
MIC5365-1.2YC5: common questions
Where can I find a MIC5365-1.2YC5 reference design?
Each of the 2 boards on this page is a real design using the MIC5365-1.2YC5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5365-1.2YC5 use?
Most are built on FPGA (2).
How big is a typical board using the MIC5365-1.2YC5?
The median is 63.9 × 67.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the MIC5365-1.2YC5?
By GitHub stars, TinyFPGA-B-Series by tinyfpga, with 201 stars.
Can I simulate one of these boards using the MIC5365-1.2YC5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.