11 open source boards using the ESP32-C6FH4

Real designs built with the ESP32-C6FH4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ESP32-C6FH4

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ESP32-C6FH4 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA3P3 pins have a capacitor to GND on 10 of 10 designs, most often 100 nF (then 10 pF).
  • The VDDPST1 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
  • The VDDA3P3 pins have a inductor on 9 of 10 designs, most often 2 nH (then 2.2 nH).
  • The VDDPST1 pin has a inductor on 9 of 10 designs, most often 2 nH (then 2.2 nH).
ANTpin 1Connected to: Signal 90%
  • Inductor on 80% · 0 H (2), 2.8 nH (1), 3 nH (1)
  • Capacitor to GND on 70% · 1.5 pF (1), 1.6 pF (1), 2.4 pF (1)
VDDA3P3pin 2, 3Connected to: Signal 75% · 3.3V 20%
  • Capacitor to GND on 100% · 100 nF (14), 10 pF (1)
  • Inductor on 90% · 2 nH (10), 2.2 nH (4)
CHIP_PUpin 4Connected to: The microcontroller 20%
  • Pull-up to 3.3V on 80% · 10 kΩ (9)
  • Capacitor to GND on 80% · 1 µF (8)
VDDPST1pin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (13), 1 µF (10), 10 µF (8)
  • Inductor on 90% · 2 nH (5), 2.2 nH (2)
GPIO2/FSPIQ/ADC1_CH2pin 8Connected to: Signal 78% · not connected 22%
  • Series resistor on 33% · 4.7 kΩ (2), 0 Ω (1)
GPIO3/ADC1_CH3pin 9Connected to: The microcontroller 22%
  • Resistor to GND on 33% · 1 MΩ (2), 10 kΩ (1)
GPIO8pin 14Connected to: Signal 89%
  • Pull-up to 3.3V on 56% · 10 kΩ (3), 5.1 kΩ (2)
GPIO9pin 15Connected to: Signal 78% · not connected 22%
  • Pull-up to 3.3V on 56% · 10 kΩ (4), 5.1 kΩ (2)
  • Capacitor to GND on 44% · 100 nF (2), 10 pF (1), 15 pF (1)
GPIO12/USB_D-pin 16Connected to: USBLC6-2P6 22%, a connector 22%
  • Series resistor on 33% · 22 Ω (4)
GPIO13/USB_D+pin 17Connected to: USBLC6-2P6 22%, a connector 22%
  • Series resistor on 33% · 22 Ω (4)
VDDPST2pin 20Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (8), 10 nF (5)
U0TXD/GPIO16/FSPICS0pin 21Connected to: Signal 89%
  • Series resistor on 44% · 499 Ω (1), 0 Ω (1)
GPIO19/SDIO_CLK/FSPICS3pin 24Connected to: A connector 33%, the microcontroller 22%
  • Series resistor on 33% · 0 Ω (2)
VDDA1pin 29Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (14), 1 µF (11), 10 nF (7)
  • Inductor on 67% · 2 nH (4)
XTAL_Npin 30Connected to: Signal 89%
  • Crystal on 89% · 40 MHz (4)
  • Capacitor to GND on 89% · 10 pF (2), 15 pF (2), 16 pF (1)
XTAL_Ppin 31Connected to: Signal 100%
  • Series resistor on 44% · 22 Ω (2), 0 Ω (1)
  • Crystal on 33% · 40 MHz (3)
  • Capacitor to GND on 33% · 15 pF (2), 26 pF (1)
VDDA2pin 32Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (13), 1 µF (12), 10 nF (7)
  • Inductor on 100% · 2 nH (5), 2.2 nH (2)
GNDpin 33Connected to: GND 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plantpal by teapotlaboratories, XIAO ESP32 C6 by hb9ezs, Iotrain by klaus-liebler and Pico2350-W-Pro-R2 by zeankundev.

The ESP32-C6FH4 in open source designs

The gallery holds 11 open source boards using the ESP32-C6FH4 from 10 GitHub repositories; a typical one measures about 38.4 × 29 mm and carries around 71 components.

73% use four copper layers or more, and 36% carry an open source license.

The most starred is Plantpal by teapotlaboratories.

Microcontrollers on boards using the ESP32-C6FH4

ESP32-C6FH4: common questions

Where can I find a ESP32-C6FH4 reference design?

Each of the 11 boards on this page is a real design using the ESP32-C6FH4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-C6FH4 VDDA3P3 pin connected?

The VDDA3P3 pins have a capacitor to GND on 10 of 10 designs, most often 100 nF (then 10 pF). Counted from the KiCad layouts of 10 open source designs using the ESP32-C6FH4.

What decoupling capacitors do designs use on the ESP32-C6FH4 VDDPST1 pin?

The VDDPST1 pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the ESP32-C6FH4.

What decoupling capacitors do designs use on the ESP32-C6FH4 VDDPST2 pin?

The VDDPST2 pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the ESP32-C6FH4.

What parts are used alongside the ESP32-C6FH4?

The AEM10941-QFN, BME688, MCP73831T-2ACI/OT, USBLC6-2P6 and XC6220B331MR-G appear in the most repositories here.

Which microcontrollers do boards using the ESP32-C6FH4 use?

Most are built on ESP32 (9), FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the ESP32-C6FH4?

The median is 38.4 × 29 mm, and 27% are two-layer designs.

What is the most popular open source board using the ESP32-C6FH4?

By GitHub stars, Plantpal by teapotlaboratories, with 98 stars.

Can I simulate one of these boards using the ESP32-C6FH4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part