19 open source boards using the ICS-43434
Real designs built with the ICS-43434, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32-pluto sdr portable
levirbl
58 × 150 mm150 parts4LNo license2ESP32
ESP32S3 Audio Cam POE
jharvey
109.4 × 129.7 mm320 parts4LMIT1RISC-V
MerlynCAM
YeetTheAnson
45 × 38 mm144 parts4LNo license1ESP32
Fibel2
nikolozka
210 × 148 mm434 parts4LNo license0ESP32
RvPhone
nrdsp
126 × 68 mm272 parts2LNo license0Raspberry Pi
HomeDeck
Kilan777
130 × 105 mm220 parts4LNo license0ESP32
TiltBox
Tom-Michiels
78 × 78 mm136 parts4LNo license0Sensor-HAT
Eniemooo
65 × 56 mm94 parts4LCC-BY-SA-4.00A1-4RD
mkol-ME
120 × 94 mm93 parts4LMIT0ESP32
Ledify
notaroomba
35.5 × 52.5 mm79 parts4LNo license0Quack face
HeyPCB
128 × 51.4 mm47 parts4LCERN-OHL-S-2.00ESP32
Quiet trace
rwrife
80 × 52 mm24 parts2LMIT0ESP32
Friendship-Signal-Bracelets
Sealflux
63 × 53.5 mm22 parts2LMIT0ESP32
Panel
nrdsp
166.6 × 94 mm261 parts2LNo license0ESP32
Badge
glovepost
59.3 × 39 mm245 parts4LMIT1ESP32S3 Audio Cam POE Smaller
jharvey
97.5 × 45.7 mm36 parts2LMIT1ESP32
Gamer Companion
donaldbell
54 × 31 mm33 parts2LCustom license0ESP32
Baby Monitor Monitor: Sensor
donaldbell
52 × 24 mm28 parts2LCustom license0
How designs wire the ICS-43434
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the ICS-43434 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 22 µF).
- The LR pin is tied to GND on 12 of 16 designs (not connected on 3).
- The SD pin has a resistor to GND on 8 of 16 designs, most often 100 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| WSpin 1 | Connected to: The microcontroller 44% |
|
| LRpin 2 | Connected to: GND 75% · not connected 19% | — |
| GNDpin 3 | Connected to: GND 94% | — |
| VDDpin 5 | Connected to: 3.3V 65% · a signal 35% |
|
| SDpin 6 | Connected to: The microcontroller 41%, ICS-43434 24% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Badge by atopile, Esp32-pluto sdr portable by levirbl, Badge by glovepost and ESP32S3 Audio Cam POE by jharvey.
The ICS-43434 in open source designs
The gallery holds 19 open source boards using the ICS-43434 from 16 GitHub repositories; a typical one measures about 78 × 53.5 mm and carries around 136 components.
63% use four copper layers or more, and 47% carry an open source license.
The most starred is Badge by atopile.
Parts used alongside the ICS-43434
Microcontrollers on boards using the ICS-43434
What boards using the ICS-43434 are built for
ICS-43434: common questions
Where can I find a ICS-43434 reference design?
Each of the 19 boards on this page is a real design using the ICS-43434. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICS-43434 VDD pin?
The VDD pin has a decoupling capacitor on 15 of 16 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 16 open source designs using the ICS-43434.
How is the ICS-43434 LR pin connected?
The LR pin is tied to GND on 12 of 16 designs (not connected on 3). Counted from the KiCad layouts of 16 open source designs using the ICS-43434.
What resistor goes on the ICS-43434 SD pin?
The SD pin has a resistor to GND on 8 of 16 designs, most often 100 kΩ. Counted from the KiCad layouts of 16 open source designs using the ICS-43434.
What parts are used alongside the ICS-43434?
The MAX98357AETE+T, USBLC6-2SC6, AP2112K-3.3TRG1, BQ25185DLHR and 532610271 appear in the most repositories here.
Which microcontrollers do boards using the ICS-43434 use?
Most are built on ESP32 (13), Raspberry Pi (1) and RISC-V (1).
How big is a typical board using the ICS-43434?
The median is 78 × 53.5 mm, and 37% are two-layer designs.
What is the most popular open source board using the ICS-43434?
By GitHub stars, Badge by atopile, with 4,032 stars.
Can I simulate one of these boards using the ICS-43434 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.