E-Display
doug-harriman·E-Display·trmnl-7.5in-diy-kit/doc/XIAO-ePaper-Display-Board-EE04-v1.2-kicad/XIAO ePaper Display Board EE04_V1.2.kicad_pcb
About the E-Display PCB
E-Display is an open source ESP32 PCB design by doug-harriman, published on GitHub under the MIT license. It is a 2-layer board measuring 2.5 × 2.5 mm, with 174 components from 62 distinct parts.
Its main chip is the XIAO-HALF-HOLE-33P, from the ESP32 family. Other key parts include the ETA3410D2I-T, ME2805A293XG, ZB25VQ32DSJG, GT30L32S4W and TVS0500DRVR. By type, the board carries 71 capacitors, 49 resistors, 12 test points, 10 ICs, 9 diodes and 6 inductors.
It belongs with the displays & leds designs in this gallery.
From the project
Electronic display for calendars, weather, etc.
To force a reset, hold the microswitch on the ESP daughterboard while pressing the reset button on the main board. There are two microswitches on the daughterboard. The one for boot is closer to the battery plug.
Firmware GitHub SEEED Studio Page SEEED Studio EE04 Display Board Page Overview Blog 3D Printed Enclosure Designs Triangular * L-Shaped

Main components on the E-Display
E-Display bill of materials (BOM)
174 components, 62 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ETA3410D2I-T ETA | DFN8G-0.5-2X2MM | U2 |
| 1 | XIAO-HALF-HOLE-33P | XIAO-ESP32-S3-Plus-SMD | U3 |
| 1 | ME2805A293XG Mirco One | SOT-23 | U4 |
| 1 | ZB25VQ32DSJG Zbit | SOIC8-1.27-5.3X5.3MM | U5 |
| 1 | GT30L32S4W GENITOP | SOP8-1.27-5.2X5.2x2.16MM | U6 |
| 1 | TVS0500DRVR TI | WSON7-0.65-2X2X0.8MM | U7 |
| 1 | TLV75801PDBVR TI | SOT-23-5 | U8 |
| 1 | SY6974B Silergy | QFN24G-0.5-4X4MM | U12 |
| 2 | TPS22916CYFPR TI | WLCSP4-0.4-0.77X0.77X0.33MM | U16, U17 |
| 1 | CJ2324 CJ | SOT23 | Q1 |
| 1 | CJ2101 CJ | SOT-323 | Q2 |
| 2 | CJ3407 长电 | SOT23 | Q3, Q6 |
| 1 | LBSS138WT1G LRC | SOT-323 | Q4 |
| 1 | CHW05200-501TAPE-2W XUNPU | FPC50-0.5-28.6X4.9X2MM | J1 |
| 1 | FPC0.5K-DH-24WB FPC 24P TOP contact SINOTOP | FPC24-0.5-15.5X4.9X2MM | J2 |
| 1 | A2001WF-02A SIGEYI | JST2+2P_2.0_PH_S2B-PH-SM4-TB_1x02-1MP_Horizontal | J3 |
| 1 | ST-PH-254-0087-1*2P SINOTOP | H2P-2.54-65_40MIL | J4 |
| 1 | PH-2.54-3A-PW 思拓展 | H3-2.54-90D | J5 |
| 1 | SMD1210R200SF 2A DaRong | F1210 | F1 |
| 1 | NTC | TP-D45MIL | NTC_IN2 |
Show 42 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MK-22D18 G3 DeYiLong | SW6-2CH-2.54-9X3.5X3.5 | SW1 |
| 4 | EL-4501V 百斯特 | SW3-DIP-SIDE-4.5X4.5X5.5MM | SW2, SW3, SW4, SW5 |
| 12 | Test Point | TP-D45MIL | TP3, TP4, TP5, TP6, TP7, TP8, TP21, TP24 +4 |
| 4 | MBR0530 Fairchild | SOD-123 | D1, D2, D3, D4 |
| 1 | 27-21/GHC-YR1S2M/3C Green Everlight | LED2-0.6X1.7MM | D5 |
| 3 | TPD1E10B06DPYR TI | ESD-0402 | D6, D8, D9 |
| 1 | SMF5.0CA MDD | SOD-123 | D7 |
| 1 | MWSA0402S-1R0MT 1UH 顺络 | INT2-SMD-4.2X4.4X1.8MM | L1 |
| 1 | WPN201610MR47MT 0.47uH Sunlord | L0805 | L2 |
| 2 | MWSD1608FE100KT 10uH Sunlord | L0603 | L3, L6 |
| 2 | SWPA5040S100MT 10uH Sunlord | L5040S | L4, L5 |
| 9 | CC0805KKX5R8BB475 4.7uF YAGEO | C0805 | C1, C5, C8, C24, C25, C29, C30, C31 +1 |
| 17 | CC0805KKX5R8BB106 10uF YAGEO | C0805 | C2, C3, C4, C6, C10, C11, C12, C13 +9 |
| 2 | CC0805MKX5R5BB476 47uF YAGEO | C0805 | C7, C34 |
| 2 | CC0603KRX7R8BB474 470nF YAGEO | C0603 | C9, C17 |
| 1 | CC0805KKX7R8BB225 2.2uF YAGEO | C0805 | C16 |
| 11 | CC0402KRX5R8BB105 1uF YAGEO | C0402 | C18, C19, C20, C21, C22, C23, C26, C27 +3 |
| 15 | CC0402KRX7R7BB104 100nF YAGEO | C0402 | C33, C44, C49, C50, C51, C53, C54, C55 +7 |
| 4 | CC0402KRX5R6BB105 1uF YAGEO | C0402 | C39, C46, C47, C48 |
| 1 | CC0402JRNPO9BN220 22pF YAGEO | C0402 | C45 |
| 3 | CC0603KRX7R9BB104 100nF YAGEO | C0603 | C57, C68, C69 |
| 2 | CC0805MKX5R8BB226 22uF YAGEO | C0805 | C61, C97 |
| 1 | CC0402KRX7R9BB102 1nF YAGEO | C0402 | C62 |
| 2 | GRM1555C1H301JA01D 300pF Murata | C0402 | C64, C65 |
| 1 | CC0402KRX7R8BB473 47nF YAGEO | C0402 | C67 |
| 3 | RC0402JR-071ML 1M YAGEO | R0402 | R1, R2, R34 |
| 1 | RL0603FR-070R47L 0.47R YAGEO | R0603 | R3 |
| 2 | RL0805FR-7W0R22L 0.22R YAGEO | R0805 | R4, R6 |
| 6 | RC0603JR-070RL 0R YAGEO | R0603 | R5, R8, R11, R14, R15, R32 |
| 1 | RC0805FR-071RL 1R YAGEO | R0805 | R7 |
| 3 | RC0402JR-070RL 0R YAGEO | R0402 | R9, R10, R64 |
| 1 | RC0402FR-0720KL 20K YAGEO | R0402 | R12 |
| 14 | RC0402FR-0710KL 10K YAGEO | R0402 | R13, R28, R29, R31, R35, R36, R37, R38 +6 |
| 2 | RC0402JR-071KL 1K YAGEO | R0402 | R16, R45 |
| 1 | NCP15XH103F03RC Murata | R0402 | R17 |
| 3 | RC0402FR-07100KL 100K YAGEO | R0402 | R23, R42, R60 |
| 1 | RC0402FR-0722KL 22K YAGEO | R0402 | R24 |
| 5 | RC0402JR-07100KL 100K YAGEO | R0402 | R25, R26, R27, R40, R43 |
| 1 | RC0402JR-073K3L 3.3K YAGEO | R0402 | R30 |
| 3 | RC0402FR-074K7L 4.7K YAGEO | R0402 | R33, R113, R137 |
| 1 | RC0402JR-0751KL 51K YAGEO | R0402 | R44 |
| 1 | RC0603FR-072R2L 2.2R YAGEO | R0603 | R46 |
E-Display design files
The KiCad project lives in the doug-harriman/E-Display repository on GitHub; these links point at the commit this page was built from.
E-Display: common questions
What microcontroller does the E-Display use?
The E-Display is built around the XIAO-HALF-HOLE-33P, from the ESP32 family.
How big is the E-Display PCB?
The E-Display measures 2.5 × 2.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the E-Display?
174 components, from 62 distinct parts. The full bill of materials is listed on this page.
Where can I download the E-Display design files?
From the doug-harriman/E-Display repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the E-Display design in my own project?
Yes, under the terms of its MIT license, which doug-harriman chose for the repository.
Can I test firmware for the E-Display without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k