4 open source boards using the TVS0500DRVR
Real designs built with the TVS0500DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Robot
oist
80 × 70 mm336 parts4LApache-2.01ESP32
Tankervision pdb
ikeefe12
100 × 100 mm444 parts4LNo license0ESP32
E-Display
doug-harriman
2.5 × 2.5 mm174 parts2LMIT0ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00
The TVS0500DRVR in open source designs
The gallery holds 4 open source boards using the TVS0500DRVR from 4 GitHub repositories; a typical one measures about 90 × 81.2 mm and carries around 255 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Robot by oist.
Parts used alongside the TVS0500DRVR
Microcontrollers on boards using the TVS0500DRVR
What boards using the TVS0500DRVR are built for
TVS0500DRVR: common questions
Where can I find a TVS0500DRVR reference design?
Each of the 4 boards on this page is a real design using the TVS0500DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TVS0500DRVR use?
Most are built on ESP32 (3) and RP2040/RP2350 (1).
How big is a typical board using the TVS0500DRVR?
The median is 90 × 81.2 mm, and 50% are two-layer designs.
What is the most popular open source board using the TVS0500DRVR?
By GitHub stars, Robot by oist, with 1 stars.
Can I simulate one of these boards using the TVS0500DRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.