10 open source boards using the TPS22916CYFPR

Real designs built with the TPS22916CYFPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TPS22916CYFPR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS22916CYFPR connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The VIN pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The VOUT pin has a series resistor on 3 of 7 designs, most often 10 kΩ (then 0 Ω).
VOUTpin A1Connected to: Signal 71% · 3V 29%
  • Capacitor to GND on 86% · 100 nF (11), 1 µF (3), 2.2 µF (1)
  • Series resistor on 43% · 10 kΩ (2), 0 Ω (1)
VINpin A2Connected to: VBAT 71% · a signal 29%
  • Decoupling capacitor on 86% · 100 nF (7), 1 µF (4), 10 µF (2)
GNDpin B1Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADC Board by esl-epfl, Solar business card by devinhorowitz, E-Display by doug-harriman and Weather pill by freder202.

The TPS22916CYFPR in open source designs

The gallery holds 10 open source boards using the TPS22916CYFPR from 7 GitHub repositories; a typical one measures about 31.9 × 20.4 mm and carries around 101 components.

80% use four copper layers or more, and 30% carry an open source license.

The most starred is Combined Module Panel by esl-epfl.

Microcontrollers on boards using the TPS22916CYFPR

What boards using the TPS22916CYFPR are built for

TPS22916CYFPR: common questions

Where can I find a TPS22916CYFPR reference design?

Each of the 10 boards on this page is a real design using the TPS22916CYFPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS22916CYFPR VOUT pin connected?

The VOUT pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TPS22916CYFPR.

What decoupling capacitors do designs use on the TPS22916CYFPR VIN pin?

The VIN pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TPS22916CYFPR.

What parts are used alongside the TPS22916CYFPR?

The SGM40567-4.2XG/TR, ATSAMD11D14A-UUT, FM8625H, LSM6DS3TR-C and MSM261DGT006 appear in the most repositories here.

Which microcontrollers do boards using the TPS22916CYFPR use?

Most are built on Nordic nRF (4), ESP32 (2) and STM32 (1).

How big is a typical board using the TPS22916CYFPR?

The median is 31.9 × 20.4 mm, and 20% are two-layer designs.

What is the most popular open source board using the TPS22916CYFPR?

By GitHub stars, Combined Module Panel by esl-epfl, with 3 stars.

Can I simulate one of these boards using the TPS22916CYFPR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part