DSH-DEX
DSHSTUDIOS·DSH-DEX·hardware/kicad/DSH-DEX.kicad_pcb
About the DSH-DEX PCB
DSH-DEX is an open source ESP32 PCB design by DSHSTUDIOS, published on GitHub. It is a 2-layer board measuring 47 × 46.5 mm, with 58 components from 35 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the MCP73831T-2ACI/OT, AP2112K-3.3TRG1, LIS3DHTR, TSOP38238 and TS3USB221ARSER. By type, the board carries 21 resistors, 15 capacitors, 7 switches, 6 ICs, 3 transistors and 3 diodes.
From the project
A portable pokemon themed tomogatchi. Made with :heart: for Dhruv
Dhruv loves Pokémon, so I made him a Poké Ball virtual pet for his birthday back in September. It's small enough to go on his keychain. I'm still putting the first one together, so the pictures below are from CAD. I'll add photos when it's built.
Turn it on with the side switch. Slide the red half up to see the OLED and the white half down to get to the buttons. Feed gives it a berry, Pet makes it happy, and Select shows its stats.

Main components on the DSH-DEX
DSH-DEX bill of materials (BOM)
58 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1 | U1 |
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U2 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | LIS3DHTR | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U4 |
| 1 | TSOP38238 | Vishay_MINICAST-3Pin | U5 |
| 1 | TS3USB221ARSER | Texas_UQFN-10_1.5x2mm_P0.5mm | U6 |
| 1 | AO3401A | SOT-23 | Q1 |
| 2 | S8050 J3Y | SOT-23 | Q2, Q3 |
| 1 | TYPE-C-31-M-12 | USB_C_HRO_TYPE-C-31-M-12_Edge | J1 |
| 1 | BM02B-SRSS-TB(LF)(SN) JST SH / LiPo | JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J2 |
| 1 | PKMCS0909E4000-R1 | Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | MSK12C02 | SW_SPDT_Shouhan_MSK12C02 | SW1 |
| 1 | TS-1088-AR02016 BOOT | SW_SPST_TS-1088-xR020 | SW2 |
| 1 | TS-1088-AR02016 RESET | SW_SPST_TS-1088-xR020 | SW3 |
| 1 | TS-1088-AR02016 FEED | SW_SPST_TS-1088-xR020 | SW4 |
| 1 | TS-1088-AR02016 PET | SW_SPST_TS-1088-xR020 | SW5 |
| 1 | TS-1088-AR02016 BATTLE | SW_SPST_TS-1088-xR020 | SW6 |
| 1 | TS-1088-AR02016 SCROLL / SELECT | SW_SPST_TS-1088-xR020 | SW7 |
| 1 | KT-0603R | LED_0603_1608Metric | D1 |
| 1 | VSMY2940G | Vishay_VSMY2940G | D2 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD2E2U06DCKR | SOT-323_SC-70 | D3 |
| 1 | CL21A475KAQNNNE 4.7uF | C_0805_2012Metric | C1 |
| 1 | CL21B225KAFNNNE 2.2uF | C_0805_2012Metric | C2 |
| 6 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C3, C4, C5, C6, C10, C15 |
| 6 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C7, C8, C11, C12, C13, C14 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C9 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R1, R2 |
| 5 | 0603WAF1002T5E 10k | R_0603_1608Metric | R3, R6, R7, R8, R9 |
| 2 | 0603WAF1001T5E 1k | R_0603_1608Metric | R4, R13 |
| 4 | 0603WAF1003T5E 100k | R_0603_1608Metric | R5, R15, R18, R19 |
| 2 | 0603WAF4701T5E 4.7k | R_0603_1608Metric | R10, R11 |
| 2 | 0603WAF1000T5E 100R | R_0603_1608Metric | R12, R17 |
| 1 | 0603WAF3300T5E 330R | R_0603_1608Metric | R14 |
| 1 | 0805W8F430JT5E 43R | R_0805_2012Metric | R16 |
| 2 | 0603WAF0000T5E 0R | R_0603_1608Metric | R20, R21 |
DSH-DEX design files
The KiCad project lives in the DSHSTUDIOS/DSH-DEX repository on GitHub; these links point at the commit this page was built from.
DSH-DEX: common questions
What microcontroller does the DSH-DEX use?
The DSH-DEX is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the DSH-DEX PCB?
The DSH-DEX measures 47 × 46.5 mm, has 2 copper layers and is 1 mm thick.
How many components are on the DSH-DEX?
58 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSH-DEX design files?
From the DSHSTUDIOS/DSH-DEX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DSH-DEX design in my own project?
The repository has no license, so all rights stay with DSHSTUDIOS. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DSH-DEX without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k