DSH-PROSE
DSHSTUDIOS·DSH-PROSE·hardware/DSH-Prose.kicad_pcb
About the DSH-PROSE PCB
DSH-PROSE is an open source ESP32 PCB design by DSHSTUDIOS, published on GitHub. It is a 2-layer board measuring 181.4 × 111.2 mm, with 52 components from 28 distinct parts.
Its main chip is the C2913204, from the ESP32 family. Other key parts include the C424093, C51118 and C128396. By type, the board carries 21 resistors, 13 capacitors, 6 switches, 4 ICs, 4 connectors and 2 transistors.
It belongs with the displays & leds designs in this gallery.
From the project
A mix between a kindle and a remarkable. made with :heart: for dwig
A pocket e-paper reader and sketchpad. The carrier board has a 170.2 × 111.2 mm main body and extends up to 11.2 mm past the display at the three front-button positions. It is 1.0 mm thick, with two copper layers and four 2.2 mm mounting holes. The ESP32-S3-WROOM-1-N8R2 RF module mounts directly to the board and has 8 MB flash, 2 MB quad PSRAM, and an on-module antenna that overhangs the right edge. Keep the display backing, battery, fasteners and metal enclosure features clear of the antenna area. The front silkscreen reads “made by pratik dash” and “happy birthday dwig <3)”. Espressif…
Main components on the DSH-PROSE
DSH-PROSE bill of materials (BOM)
52 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2913204 ESP32-S3-WROOM-1-N8R2 | ESP32-S3-WROOM-1 | U1 |
| 1 | C424093 MCP73831T-2ACI/OT | SOT-23-5 | U2 |
| 1 | C51118 AP2112K-3.3TRG1 | SOT-23-5 | U3 |
| 1 | C128396 TS3USB221ARSER | Texas_UQFN-10_1.5x2mm_P0.5mm | U4 |
| 1 | C15127 AO3401A | SOT-23 | Q1 |
| 1 | C8545 2N7002 | SOT-23 | Q2 |
| 1 | C165948 TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C160352 JST PH / protected 1S LiPo | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J2 |
| 1 | BM12B-GHS-TBT | JST_GH_BM12B-GHS-TBT_1x12-1MP_P1.25mm_Vertical | J3 |
| 1 | C114218 DM3AT-SF-PEJM5 | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | C431540 MSK12C02 | SW_SPDT_Shouhan_MSK12C02 | SW1 |
| 1 | C110293 BOOT | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW2 |
| 1 | C110293 RESET | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW3 |
| 1 | C720477 PREV / CLEAR | SW_SPST_TS-1088-xR020 | SW4 |
| 1 | C720477 MODE | SW_SPST_TS-1088-xR020 | SW5 |
| 1 | C720477 NEXT / SAVE | SW_SPST_TS-1088-xR020 | SW6 |
| 1 | C2286 Red charge LED | LED_0603_1608Metric | D1 |
| 1 | C1855726 TPD2E2U06DCKR | SOT-323_SC-70 | D2 |
| 7 | C15850 10uF | C_0805_2012Metric | C1, C2, C3, C4, C7, C10, C12 |
| 5 | C14663 100nF | C_0603_1608Metric | C5, C8, C9, C11, C13 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C29936 1uF | C_0603_1608Metric | C6 |
| 2 | C23186 5.1k | R_0603_1608Metric | R1, R2 |
| 12 | C25804 10k | R_0603_1608Metric | R3, R6, R7, R8, R11, R12, R15, R16 +4 |
| 1 | C21190 1k | R_0603_1608Metric | R4 |
| 1 | C25803 100k | R_0603_1608Metric | R5 |
| 2 | C23345 22R | R_0603_1608Metric | R9, R10 |
| 2 | C23162 4.7k | R_0603_1608Metric | R13, R14 |
| 1 | C25819 47k | R_0603_1608Metric | R21 |
DSH-PROSE design files
The KiCad project lives in the DSHSTUDIOS/DSH-PROSE repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/DSH-Prose.kicad_pcb
- Schematichardware/DSH-Prose.kicad_sch
- BOMBOM.csv
DSH-PROSE: common questions
What microcontroller does the DSH-PROSE use?
The DSH-PROSE is built around the C2913204, from the ESP32 family.
How big is the DSH-PROSE PCB?
The DSH-PROSE measures 181.4 × 111.2 mm, has 2 copper layers and is 1 mm thick.
How many components are on the DSH-PROSE?
52 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSH-PROSE design files?
From the DSHSTUDIOS/DSH-PROSE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DSH-PROSE design in my own project?
The repository has no license, so all rights stay with DSHSTUDIOS. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DSH-PROSE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k