7 open source boards using the C424093
Real designs built with the C424093, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Rp2350b launchpad
Terstegge
58.4 × 83.8 mm122 parts2LNo license5ESP32
T1000-canary
andrewchilds
72 × 72 mm39 parts4LMIT4ESP32
Flight-Data-Computer
Ethan-Poag
86 × 165 mm125 parts2LGPL-3.03ESP32
DSH-PROSE
DSHSTUDIOS
181.4 × 111.2 mm52 parts2LNo license1ESP32
Edge detector
itstoomuchbutter
43 × 20 mm40 parts2LNo license1RP2040/RP2350
Embedded-Board
nicolas-viale
80 × 60 mm67 parts2LNo license0ESP32
Sonpakharu
bkrajendra
49 × 71 mm47 parts2LNo license0
How designs wire the C424093
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the C424093 connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 6 of 7 designs, most often 2 kΩ (then 10 kΩ).
- The STAT pin has a series resistor on 5 of 7 designs, most often 5.1 kΩ (then 470 Ω).
- The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 22 µF).
- The VBAT pin has a decoupling capacitor on 3 of 7 designs, most often 10 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 100% |
|
| VSSpin 2 | Connected to: GND 100% | — |
| VBATpin 3 | Connected to: VBAT 71% · a signal 29% |
|
| VDDpin 4 | Connected to: VBUS 86% |
|
| PROGpin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp2350b launchpad-PCB by Terstegge, T1000-canary by andrewchilds, Flight-Data-Computer by Ethan-Poag and DSH-PROSE by DSHSTUDIOS.
The C424093 in open source designs
The gallery holds 7 open source boards using the C424093 from 7 GitHub repositories; a typical one measures about 72 × 72 mm and carries around 52 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Rp2350b launchpad-PCB by Terstegge.
Microcontrollers on boards using the C424093
What boards using the C424093 are built for
C424093: common questions
Where can I find a C424093 reference design?
Each of the 7 boards on this page is a real design using the C424093. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the C424093 PROG pin?
The PROG pin has a resistor to GND on 6 of 7 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the C424093.
What resistor goes on the C424093 STAT pin?
The STAT pin has a series resistor on 5 of 7 designs, most often 5.1 kΩ (then 470 Ω). Counted from the KiCad layouts of 7 open source designs using the C424093.
What decoupling capacitors do designs use on the C424093 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 7 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the C424093.
Which microcontrollers do boards using the C424093 use?
Most are built on ESP32 (5) and RP2040/RP2350 (2).
How big is a typical board using the C424093?
The median is 72 × 72 mm, and 86% are two-layer designs.
What is the most popular open source board using the C424093?
By GitHub stars, Rp2350b launchpad-PCB by Terstegge, with 5 stars.
Can I simulate one of these boards using the C424093 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.