CatWAN Citizen
ElectronicCats·CatWAN_Citizen·Hardware/citizen_sensor.kicad_pcb
About the CatWAN Citizen PCB
CatWAN Citizen is an open source Microchip SAM PCB design by ElectronicCats, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 52 × 80 mm, with 66 components from 43 distinct parts.
Its main chip is the ATSAMD21E18A-MU, from the Microchip SAM family. Other key parts include the TLC2272, MCP73831, AP2114, MICS-4514 and RFM95W-868S2. By type, the board carries 24 resistors, 16 capacitors, 7 ICs, 7 connectors, 6 diodes and 1 transistor.
It belongs with the rf & radio and sensors designs in this gallery.
From the project
CatWAN Citizen for the Urban Sensor Board
Main components on the CatWAN Citizen
CatWAN Citizen bill of materials (BOM)
66 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC2272 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MCP73831 | SOT-23-5 | U2 |
| 1 | AP2114 | SOT-223-3_TabPin2 | U3 |
| 1 | MICS-4514 | MICS_10-SMD | U4 |
| 1 | RFM95W-868S2 | RFM95W | U6 |
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | ATSAMD21E18A-MU | TQFP-32_7x7mm_P0.8mm | U8 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | BATT | TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J2 |
| 1 | VEML6075 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | BME280 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | PROG | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | CSS811 | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | MAX30105 | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | Antenna_Shield | AMPHENOL_901-144 | AE1 |
| 1 | Fuse | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | Microphone | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | MK1 |
| 1 | 100K GAIN | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | RST | SW_SPST_TL3342 | SW1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D_Schottky | D_SOD-123 | D1 |
| 1 | CHARGE | LED_0805_2012Metric_Castellated | D2 |
| 1 | ON | LED_0805_2012Metric_Castellated | D3 |
| 2 | RB751S40T1G | D_SOD-123 | D4, D5 |
| 1 | Builtin | LED_0805_2012Metric_Castellated | D6 |
| 6 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C5, C12, C14 |
| 6 | 0.1uf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6, C7, C9, C15, C16 |
| 4 | 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C10, C11, C13 |
| 2 | 30 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4 |
| 1 | 36 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 269 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 5 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R11, R12, R14, R17 |
| 1 | 47k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 3 | 1K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R10, R18 |
| 2 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R24 |
| 1 | 2.2K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 100K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | 22K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15 |
| 2 | 100 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R19 |
| 1 | 66.5k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | 66.5 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 680k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | 330k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R23 |
CatWAN Citizen design files
The KiCad project lives in the ElectronicCats/CatWAN_Citizen repository on GitHub; these links point at the commit this page was built from.
CatWAN Citizen: common questions
What microcontroller does the CatWAN Citizen use?
The CatWAN Citizen is built around the ATSAMD21E18A-MU, from the Microchip SAM family.
How big is the CatWAN Citizen PCB?
The CatWAN Citizen measures 52 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CatWAN Citizen?
66 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the CatWAN Citizen design files?
From the ElectronicCats/CatWAN_Citizen repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CatWAN Citizen design in my own project?
Yes, under the terms of its AGPL-3.0 license, which ElectronicCats chose for the repository.
Can I test firmware for the CatWAN Citizen without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416