5 open source boards using the AP2114

Real designs built with the AP2114, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the AP2114

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP2114 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF).
  • The VO pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 4.7 µF).
GNDpin 1Connected to: GND 89%
VOpin 2Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 40% · 10 µF (2), 4.7 µF (1), 22 µF (1)
VIpin 3Connected to: VCC 80% · a signal 20%
  • Decoupling capacitor on 100% · 4.7 µF (3), 10 µF (2), 100 nF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CatWAN Citizen by ElectronicCats, LASDAC by Grix, Bottom board palmtop by ZeroPhone and Helios lasercube api by hypertechnic.

The AP2114 in open source designs

The gallery holds 5 open source boards using the AP2114 from 5 GitHub repositories; a typical one measures about 80 × 70 mm and carries around 78 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is LASDAC by Grix.

Microcontrollers on boards using the AP2114

What boards using the AP2114 are built for

AP2114: common questions

Where can I find a AP2114 reference design?

Each of the 5 boards on this page is a real design using the AP2114. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AP2114 VI pin?

The VI pin has a decoupling capacitor on 5 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the AP2114.

What decoupling capacitors do designs use on the AP2114 VO pin?

The VO pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the AP2114.

What parts are used alongside the AP2114?

The ATSAM4S, DAC084S085C, ISA_DC-DC_converter, LM358 and TL084_v appear in the most repositories here.

Which microcontrollers do boards using the AP2114 use?

Most are built on Microchip SAM (3) and RP2040/RP2350 (1).

How big is a typical board using the AP2114?

The median is 80 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the AP2114?

By GitHub stars, LASDAC by Grix, with 3 stars.

Can I simulate one of these boards using the AP2114 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part