5 open source boards using the THB001P
Real designs built with the THB001P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Thumbtroller
StuckAtPrototype
74.7 × 30 mm69 parts4LNo license304RP2040/RP2350
Board
wang-edward
300 × 120 mm228 parts4LMIT5ESP32
Controller
felted67
29 × 74 mm58 parts4LNo license0MicroHardController
MH-Flight-Simulator-X
90.5 × 143.5 mm6 parts2LNo license0ESP32
SBRcontroller
hughminhphan
113.5 × 60.8 mm23 parts2LNo license0
How designs wire the THB001P
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the THB001P connects to, and the resistors, capacitors and other passives placed on it.
- Pin S1 is left unconnected on 5 of 5 designs.
- Pin S3 is left unconnected on 5 of 5 designs.
- Pin S2 is left unconnected on 3 of 3 designs.
- Pin S4 is left unconnected on 3 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin S1 | Connected to: Not connected 100% | — |
| Pin S2 | Connected to: Not connected 100% | — |
| Pin S3 | Connected to: Not connected 100% | — |
| Pin S4 | Connected to: Not connected 100% | — |
| VCCXpin VR1_1 | Connected to: 3.3V 80% · GND 20% | — |
| GNDpin VR1_3, VR2_3 | Connected to: GND 80% · 3.3V 20% | — |
| VCCYpin VR2_1 | Connected to: 3.3V 80% · GND 20% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Thumbtroller by StuckAtPrototype, Board by wang-edward, Controller by felted67 and SBRcontroller by hughminhphan.
The THB001P in open source designs
The gallery holds 5 open source boards using the THB001P from 5 GitHub repositories; a typical one measures about 90.5 × 74 mm and carries around 58 components.
60% use four copper layers or more, and 20% carry an open source license.
The most starred is Thumbtroller by StuckAtPrototype.
Microcontrollers on boards using the THB001P
What boards using the THB001P are built for
THB001P: common questions
Where can I find a THB001P reference design?
Each of the 5 boards on this page is a real design using the THB001P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the THB001P pin S1 connected?
Pin S1 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the THB001P.
How is the THB001P pin S3 connected?
Pin S3 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the THB001P.
How is the THB001P pin S2 connected?
Pin S2 is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the THB001P.
Which microcontrollers do boards using the THB001P use?
Most are built on ESP32 (3) and RP2040/RP2350 (1).
How big is a typical board using the THB001P?
The median is 90.5 × 74 mm, and 40% are two-layer designs.
What is the most popular open source board using the THB001P?
By GitHub stars, Thumbtroller by StuckAtPrototype, with 304 stars.
Can I simulate one of these boards using the THB001P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.