BE6502 computer

FilipCichowski·BE6502_computer_PCB

BE6502 computer PCB layout, top view — open source board by FilipCichowski

About the BE6502 computer PCB

BE6502 computer is an open source PCB design by FilipCichowski, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 61 components from 30 distinct parts.

Other key parts include the W65C02, HM62256BLP-7, 28C256, WD65C22 and 74HC00. By type, the board carries 21 resistors, 8 diodes, 7 ICs, 7 capacitors, 6 switches and 4 modules.

It belongs with the retro computing designs in this gallery.

From the project

PCB project for BE6502 educational computer

As you can see, I've also got the 1 Mhz oscillator installed as it is listed in Ben Eaters design though it is not connected by default so that the adjustable or manual clock can be used instead - to enable the 1 Mhz clock you'll need to install a jumper as shown below.

I did however have some issues running the CPU reliably at this speed, this is due to the reset circuit specified not being suitable for use at anything other than very low speeds. While we're probably waiting for part 8 of the video series to fix this issue, you can build one yourself on a breadboard with just about the same…

BE6502 computer, from the project README
From the project README

Main components on the BE6502 computer

BE6502 computer bill of materials (BOM)

61 components, 30 distinct parts.

QtyPartRefs
1
W65C02
U1
1
HM62256BLP-7
U2
1
28C256
U3
1
WD65C22
U4
1
74HC00
U5
1
RC1602A
U6
1
LM555
U7
4
Mounting
M1, M2, M3, M4
1
1MHz
X1
1
Expansion
J1
1
CLOCK_SEL
J2
1
Barrel_Jack_Switch
J3
1
Control
J4
1
LED_EN
JP1
1
LCD_EN
JP2
1
R_POT
RV1
1
RESET
SW1
1
MIDDLE
SW2
1
UP
SW3
1
DOWN
SW4
Show 10 more
QtyPartRefs
1
LEFT
SW5
1
RIGHT
SW6
8
LED
D1, D2, D3, D4, D5, D6, D7, D8
6
100nF
C1, C2, C3, C4, C5, C7
1
220nF
C6
2
3k3
R1, R2
2
3.3k
R3, R18
7
1k
R4, R5, R6, R7, R8, R9, R21
9
220
R10, R11, R12, R13, R14, R15, R16, R17 +1
1
47k
R20

BE6502 computer design files

The KiCad project lives in the FilipCichowski/BE6502_computer_PCB repository on GitHub; these links point at the commit this page was built from.

BE6502 computer: common questions

How big is the BE6502 computer PCB?

The BE6502 computer measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BE6502 computer?

61 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the BE6502 computer design files?

From the FilipCichowski/BE6502_computer_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the BE6502 computer design in my own project?

The repository has no license, so all rights stay with FilipCichowski. Use it as a reference, and ask the author before reusing the design.

Similar boards