9 open source boards using the WD65C22

Real designs built with the WD65C22, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the WD65C22

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the WD65C22 connects to, and the resistors, capacitors and other passives placed on it.

  • The RESET pin has a pull-up to 5V on 5 of 8 designs, most often 1 kΩ.
GNDpin 1Connected to: GND 100%
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 38% · 100 nF (3)
IRQpin 21Connected to: A connector 63%, W65C02 38%
  • Pull-up to VCC on 38% · 3.3 kΩ (2), 10 kΩ (1)
RESETpin 34Connected to: A connector 63%, W65C02 38%, LM555 25%
  • Pull-up to 5V on 63% · 1 kΩ (5)
  • Capacitor to GND on 38% · 100 nF (1)

36 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BE6502 SBC by tebl, Av board by rjw57, 6502-Computer-PCB by The-Invent0r and 6502fast3via by gfoot.

The WD65C22 in open source designs

The gallery holds 9 open source boards using the WD65C22 from 8 GitHub repositories; a typical one measures about 148.6 × 99.1 mm and carries around 61 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is BE6502 SBC by tebl.

Microcontrollers on boards using the WD65C22

What boards using the WD65C22 are built for

WD65C22: common questions

Where can I find a WD65C22 reference design?

Each of the 9 boards on this page is a real design using the WD65C22. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the WD65C22 RESET pin?

The RESET pin has a pull-up to 5V on 5 of 8 designs, most often 1 kΩ. Counted from the KiCad layouts of 8 open source designs using the WD65C22.

What parts are used alongside the WD65C22?

The 74HC00, 28C256, W65C02, 6551 and 74HC166 appear in the most repositories here.

Which microcontrollers do boards using the WD65C22 use?

Most are built on AVR/Arduino (4).

How big is a typical board using the WD65C22?

The median is 148.6 × 99.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the WD65C22?

By GitHub stars, BE6502 SBC by tebl, with 128 stars.

Can I simulate one of these boards using the WD65C22 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part