Joule Chief
fishPointer·Joule-Thief·KiCAD/Joule Chief/Joule Chief.kicad_pcb
About the Joule Chief PCB
Joule Chief is an open source PCB design by fishPointer, published on GitHub under the MIT license. It is a 2-layer board measuring 84 × 98 mm, with 90 components from 30 distinct parts.
Other key parts include the INA219AXD, LTC3105XMS, AD5280, DW01 and TP4056. By type, the board carries 34 resistors, 14 capacitors, 11 connectors, 11 diodes, 10 transistors and 7 ICs.
It belongs with the power & battery designs in this gallery.
From the project
Objectives: - Extract all usable electrical energy from used/"dead" Alkaline Cells (AA, AAA, etc.) - Measure & Log energy extraction data from each cell & deliver analytics - Efficiently convert and push energy extracted into a Li-Ion power bank
Objectives: - Extract all usable electrical energy from used/"dead" Alkaline Cells (AA, AAA, etc.) - Measure & Log energy extraction data from each cell & deliver analytics - Efficiently convert and push energy extracted into a Li-Ion power bank
Topology - INA219 - Energy Metering - LTC3105 - Low Voltage Boost Converter - AD5280 - Digital Potentiometer, 200kΩ - DW01 - 18650 Single-cell BMS - TP4056 - Single-cell 18650 Charger - FS8205 - Dual-FET package for DW01 - AO3400 - Low Voltage N-E-FET - 1N5817 - Low Voltage Schottky Diode
Main components on the Joule Chief
Joule Chief bill of materials (BOM)
90 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | INA219AXD INA219AxD | SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 1 | LTC3105XMS LTC3105xMS | MSOP-12_3x4.039mm_P0.65mm | U2 |
| 1 | AD5280 | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | DW01 | SOT-23-6_Handsoldering | U5 |
| 1 | TP4056 | V2_SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U6 |
| 1 | FS8205A | FS8205A_Wide | U7 |
| 10 | AO3400A | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 7 | CONN_01X06 Conn_01x06 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J1, J2, J3, J4, J5, J6, J7 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J8 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J10 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J11 |
| 1 | 18650 | 18650_Cell_Clip_V2 | LITH1 |
| 1 | TestPoint_Alt | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TPx1 |
| 11 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +3 |
| 1 | 10U 10u | Power_Inductor_101040 | L1 |
| 7 | 0.1U 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C9, C10, C11, C12, C13 |
| 2 | 1F | 1F_Supercap | C2, C5 |
| 1 | 100U 100u | CP_Radial_D5.0mm_P2.00mm | C4 |
| 2 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C14 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 4.7U 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 2 | 0.1R | R_Shunt_2512_V2 | R1, R6 |
| 4 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R7, R8 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 220K 220k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 13 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R17, R18, R19, R20 +5 |
| 10 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R26, R27, R28, R29, R30, R31, R32 +2 |
| 2 | 2.2K 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
Joule Chief design files
The KiCad project lives in the fishPointer/Joule-Thief repository on GitHub; these links point at the commit this page was built from.
Joule Chief: common questions
How big is the Joule Chief PCB?
The Joule Chief measures 84 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Joule Chief?
90 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Joule Chief design files?
From the fishPointer/Joule-Thief repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Joule Chief design in my own project?
Yes, under the terms of its MIT license, which fishPointer chose for the repository.
More boards in Joule-Thief
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k