SmartLED-vPinball-Power-Board
fordcrews·SmartLED-vPinball-Power-Board·exp32-atx-powerboard/exp32-atx-powerboard.kicad_pcb
About the SmartLED-vPinball-Power-Board
SmartLED-vPinball-Power-Board is an open source ESP32 PCB design by fordcrews, published on GitHub under the MIT license. It is a 2-layer board measuring 49.9 × 190.6 mm, with 30 components from 9 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the 74AHCT125. By type, the board carries 16 connectors, 10 fuses, 3 ICs and 1 resistor.
It belongs with the dev boards & breakouts and displays & leds designs in this gallery.
From the project
SmartLED v1 is a modular, ATX-powered breakout board designed for ESP32-based lighting, solenoid, and accessory control projects such as:
- Virtual Pinball Machines - Holiday Light Shows - Aquarium Automation - Home Decor Lighting Systems
📁 PCB, schematic, BOM, and KiCad project files coming soon!
Main components on the SmartLED-vPinball-Power-Board
SmartLED-vPinball-Power-Board bill of materials (BOM)
30 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-DevKitC_30Pin | U1 |
| 2 | 74AHCT125 | DIP-14_W7.62mm | U2, U3 |
| 8 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | Conn_02x12_Top_Bottom | Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical | J9 |
| 2 | Conn_02x12_Top_Bottom | PinHeader_2x12_P2.54mm_Vertical | J10, J11 |
| 3 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J12, J13, J18 |
| 2 | Conn_01x02 | BarrelJack_Horizontal | J16, J17 |
| 10 | Fuse | Fuseholder_Blade_Mini_Keystone_3568 | F1, F2, F3, F4, F5, F6, F7, F8 +2 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
SmartLED-vPinball-Power-Board design files
The KiCad project lives in the fordcrews/SmartLED-vPinball-Power-Board repository on GitHub; these links point at the commit this page was built from.
SmartLED-vPinball-Power-Board: common questions
What microcontroller does the SmartLED-vPinball-Power-Board use?
The SmartLED-vPinball-Power-Board is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the SmartLED-vPinball-Power-Board?
The SmartLED-vPinball-Power-Board measures 49.9 × 190.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartLED-vPinball-Power-Board?
30 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartLED-vPinball-Power-Board design files?
From the fordcrews/SmartLED-vPinball-Power-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SmartLED-vPinball-Power-Board design in my own project?
Yes, under the terms of its MIT license, which fordcrews chose for the repository.
Can I test firmware for the SmartLED-vPinball-Power-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k