HardLabs

Kicad latte panda mu

futureshocked·kicad_latte_panda_mu

Kicad latte panda mu PCB layout, top view — open source board by futureshocked
Simulate this board

About the Kicad latte panda mu PCB

Kicad latte panda mu is an open source PCB design by futureshocked, published on GitHub. It is a 4-layer board measuring 170.1 × 100 mm, with 196 components from 54 distinct parts.

Other key parts include the D3V3XA4B10LP, RTL8111H-CG-RH, ULC0524P, USB PD-CH224K-ESSOP10 and LM2734X. By type, the board carries 65 capacitors, 52 resistors, 25 diodes, 20 connectors, 16 ICs and 5 transistors.

It belongs with the dev boards & breakouts and power & battery designs in this gallery.

From the project

A custom carrier-board reference design for the LattePanda Mu compute module, used as a worked example in the Tech Explorations KiCad course:

A custom carrier-board reference design for the LattePanda Mu compute module, used as a worked example in the Tech Explorations KiCad course:

This repository contains the KiCad 7+ source, project libraries, generated Gerbers, and assembly outputs for a 4-layer carrier board that breaks out the LattePanda Mu module to real-world I/O: Ethernet, HDMI, USB 2.0/3.0, PCIe x4, an M.2 E-key slot, GPIO, fan control, and a full power supply.

Main components on the Kicad latte panda mu

D3V3XA4B10LPRTL8111H-CG-RHULC0524PUSB PD-CH224K-ESSOP10LM2734XLattePanda_Mu

Kicad latte panda mu bill of materials (BOM)

196 components, 54 distinct parts.

QtyPartRefs
7
D3V3XA4B10LP
U1, U2, U3, U4, U5, U7, U8
1
RTL8111H-CG-RH
U6
5
ULC0524P
U9, U10, U11, U12, U17
1
USB PD-CH224K-ESSOP10
U14
2
LM2734X
U15, U16
1
LattePanda_Mu
A1
1
Fan_4pin
M1
2
2N7002
Q1, Q8
3
2SK3018
Q2, Q3, Q4
1
25MHz
Y1
5
Conn_01x03_Pin
J1, J8, J10, J11, J14
1
HDMI_A
J3
1
USB3_A_Stacked
J4
1
USB_A_Stacked
J5
1
RJ45_RB1-125B8G1A
J6
7
Conn_01x04_Pin
J7, J9, J12, J13, J19, J20, J21
1
Bus_M.2_Socket_M
J15
1
Bus_M.2_Socket_E
J16
1
Barrel_Jack_Switch
J17
1
USB_C_Receptacle_USB2.0_16P
J18
Show 34 more
QtyPartRefs
1
Battery_Cell
BT1
1
6V/50mA
F1
4
6V/1A
F2, F3, F4, F5
2
SW_Push
SW1, SW2
3
ESD5V0B03
D1, D2, D3
2
1N5819WS
D4, D26
8
ESD9B5.0ST5G
D5, D6, D7, D8, D10, D11, D21, D25
1
LED_G
D9
3
D_Zener
D12, D13, D14
6
D_Schottky
D15, D16, D17, D18, D19, D20
1
LED
D22
1
3V3 Izt=5mA
D24
2
2.2uH/4.3A
L1, L2
31
100nF/50V
C17, C18, C19, C20, C21, C22, C23, C24 +23
15
22uF/10V
C30, C31, C32, C64, C65, C67, C68, C74 +7
5
10uF/50V
C44, C51, C53, C57, C59
3
12pF/50V
C46, C47, C73
4
220nF/50V
C49, C50, C55, C56
3
1uF/16V
C61, C66, C69
2
100nF/50V
C70, C71
2
100nF/10V
C78, C79
4
1K/1%
R1, R11, R37, R47
10
10K/1%
R2, R20, R21, R34, R35, R36, R49, R58 +2
7
2.2K/1%
R3, R5, R15, R18, R19, R52, R53
2
1M/1%
R4, R23
3
21.5K/1%
R6, R59, R68
10
470R/1%
R7, R8, R9, R10, R13, R14, R16, R17 +2
1
2.49K/1%
R22
4
0R/1%
R27, R29, R32, R33
1
56K/1%
R43
4
100K/1%
R46, R51, R76, R77
3
100R/1%
R48, R55, R69
1
75K/1%
R57
2
4.7K/1%
R60, R72

Kicad latte panda mu design files

The KiCad project lives in the futureshocked/kicad_latte_panda_mu repository on GitHub; these links point at the commit this page was built from.

Kicad latte panda mu: common questions

How big is the Kicad latte panda mu PCB?

The Kicad latte panda mu measures 170.1 × 100 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Kicad latte panda mu?

196 components, from 54 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kicad latte panda mu design files?

From the futureshocked/kicad_latte_panda_mu repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kicad latte panda mu design in my own project?

The repository has no license, so all rights stay with futureshocked. Use it as a reference, and ask the author before reusing the design.

Similar boards