8 open source boards using the LattePanda_Mu
Real designs built with the LattePanda_Mu, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Lattepanda MOKA
piecol
100 × 70.1 mm207 parts4LCERN-OHL-S-2.035Kicad latte panda mu
futureshocked
170.1 × 100 mm196 parts4LNo license4Cintiq-Companion-3
a-little-wifi
214.3 × 116.5 mm67 parts2LNo license2RP2040/RP2350
RDAT
Astrid-Delestine
455.2 × 254.8 mm505 parts4LMIT0LattePanda-Mu-Lite-Custom-Carrier
gorkemguven
119.1 × 141.2 mm194 parts4LMIT0NOMAD
pat-gc
116 × 127.3 mm149 parts4LNo license0Primer Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm223 parts4LMIT305Primer Carrier for LattePanda Mu
Astrid-Delestine
146 × 102 mm223 parts4LMIT0
How designs wire the LattePanda_Mu
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LattePanda_Mu connects to, and the resistors, capacitors and other passives placed on it.
- The HSIO0_TX+ pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The HSIO0_TX- pin has a series capacitor on 7 of 7 designs, most often 100 nF.
- The HSIO2_TX+ pin has a series capacitor on 7 of 7 designs, most often 220 nF.
- The HSIO2_TX- pin has a series capacitor on 7 of 7 designs, most often 220 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PWRBTNpin 1 | Connected to: Signal 86% |
|
| FAN1_PWMpin 2 | Connected to: Signal 71% · not connected 29% |
|
| RSTBTNpin 3 | Connected to: Signal 71% · not connected 29% |
|
| FAN1_TACpin 4 | Connected to: Signal 71% · not connected 29% |
|
| SLS_S0pin 5 | Connected to: Signal 86% |
|
| FAN2_PWMpin 6 | Connected to: Not connected 100% | — |
| FAN2_TACpin 8 | Connected to: Not connected 100% | — |
| TSENSEpin 9 | Connected to: Not connected 100% | — |
| GNDpin 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47, 50, 53, 56, 59, 62, 65, 68, 71, 74, 77, 80, 83, 86, 89, 92, 95, 98, 101, 107, 110, 113, 116, 135, 136, 151, 158 | Connected to: GND 100% | — |
| HSIO0_TX+pin 13 | Connected to: Signal 100% |
|
| HSIO0_TX-pin 15 | Connected to: Signal 100% |
|
| HSIO1_TX+pin 19 | Connected to: Signal 86% |
|
| HSIO1_TX-pin 21 | Connected to: Signal 86% |
|
| HSIO2_TX+pin 25 | Connected to: Signal 100% |
|
| HSIO2_TX-pin 27 | Connected to: Signal 100% |
|
| HSIO3_TX+pin 31 | Connected to: Signal 100% |
|
| HSIO3_TX-pin 33 | Connected to: Signal 100% |
|
| HSIO8_TX+pin 37 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO8_TX-pin 39 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO9_TX+pin 43 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO9_TX-pin 45 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO10_TX+pin 49 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO10_TX-pin 51 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO11_TX+pin 55 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO11_TX-pin 57 | Connected to: Not connected 57% · a signal 43% |
|
| HSIO6_TX+pin 61 | Connected to: Signal 86% |
|
| HSIO6_TX-pin 63 | Connected to: Signal 86% |
|
| HSIO6_RX+pin 64 | Connected to: Signal 86% |
|
| HSIO6_RX-pin 66 | Connected to: Signal 86% |
|
| USB2_P4+pin 70 | Connected to: Not connected 86% | — |
| USB2_P4-pin 72 | Connected to: Not connected 86% | — |
| USB2_P8+pin 82 | Connected to: Not connected 100% | — |
| USB2_P8-pin 84 | Connected to: Not connected 100% | — |
| REFCLK1+pin 91 | Connected to: Not connected 86% | — |
| REFCLK1-pin 93 | Connected to: Not connected 86% | — |
| REFCLK2+pin 97 | Connected to: Not connected 71% · a signal 29% | — |
| REFCLK2-pin 99 | Connected to: Not connected 71% · a signal 29% | — |
| CLKREQ3pin 100 | Connected to: Signal 100% |
|
| CLKREQ4pin 102 | Connected to: Signal 100% |
|
| SMB_ALERTpin 104 | Connected to: Not connected 100% | — |
82 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Primer Carrier for LattePanda Mu by LattePandaTeam, Lattepanda MOKA by piecol, Kicad latte panda mu by futureshocked and Cintiq-Companion-3 by a-little-wifi.
The LattePanda_Mu in open source designs
The gallery holds 8 open source boards using the LattePanda_Mu from 7 GitHub repositories; a typical one measures about 146 × 109.3 mm and carries around 202 components.
88% use four copper layers or more, and 63% carry an open source license.
The most starred is Primer Carrier for LattePanda Mu by LattePandaTeam.
Parts used alongside the LattePanda_Mu
Microcontrollers on boards using the LattePanda_Mu
What boards using the LattePanda_Mu are built for
LattePanda_Mu: common questions
Where can I find a LattePanda_Mu reference design?
Each of the 8 boards on this page is a real design using the LattePanda_Mu. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LattePanda_Mu HSIO0_TX+ pin connected?
The HSIO0_TX+ pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the LattePanda_Mu.
How is the LattePanda_Mu HSIO0_TX- pin connected?
The HSIO0_TX- pin has a series capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the LattePanda_Mu.
How is the LattePanda_Mu HSIO2_TX+ pin connected?
The HSIO2_TX+ pin has a series capacitor on 7 of 7 designs, most often 220 nF. Counted from the KiCad layouts of 7 open source designs using the LattePanda_Mu.
What parts are used alongside the LattePanda_Mu?
The ULC0524P, RTL8111H-CG-RH, SY8253ADC, CH224K and TPAZ1023-04F appear in the most repositories here.
Which microcontrollers do boards using the LattePanda_Mu use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the LattePanda_Mu?
The median is 146 × 109.3 mm, and 13% are two-layer designs.
What is the most popular open source board using the LattePanda_Mu?
By GitHub stars, Primer Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.
Can I simulate one of these boards using the LattePanda_Mu before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.