11 open source boards using the ULC0524P

Real designs built with the ULC0524P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ULC0524P

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ULC0524P connects to, and the resistors, capacitors and other passives placed on it.

  • The NC pins have a series capacitor on 5 of 8 designs, most often 100 nF.
  • Pin 1 has a series capacitor on 4 of 8 designs, most often 100 nF.
  • Pin 2 has a series capacitor on 4 of 8 designs, most often 100 nF.
Pin 1Connected to: A connector 88%, LattePanda_Mu 50%
  • Series capacitor on 50% · 100 nF (4)
Pin 2Connected to: A connector 88%, LattePanda_Mu 50%
  • Series capacitor on 50% · 100 nF (4)
VSSpin 3, 8Connected to: GND 100%
Pin 4Connected to: A connector 88%, LattePanda_Mu 50%
  • Series capacitor on 38% · 100 nF (3)
Pin 5Connected to: A connector 88%, LattePanda_Mu 50%
  • Series capacitor on 38% · 100 nF (3)
NCpin 6, 7, 9, 10Connected to: A connector 88%, LattePanda_Mu 50%
  • Series capacitor on 63% · 100 nF (14)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Primer Carrier for LattePanda Mu by LattePandaTeam, Lattepanda MOKA by piecol, Nvme Carrier for LattePanda Mu by El-Luhb and Kicad latte panda mu by futureshocked.

The ULC0524P in open source designs

The gallery holds 11 open source boards using the ULC0524P from 8 GitHub repositories; a typical one measures about 146 × 102 mm and carries around 223 components.

100% use four copper layers or more, and 82% carry an open source license.

The most starred is MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam.

Microcontrollers on boards using the ULC0524P

What boards using the ULC0524P are built for

ULC0524P: common questions

Where can I find a ULC0524P reference design?

Each of the 11 boards on this page is a real design using the ULC0524P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ULC0524P NC pin connected?

The NC pins have a series capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the ULC0524P.

How is the ULC0524P pin 1 connected?

Pin 1 has a series capacitor on 4 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the ULC0524P.

How is the ULC0524P pin 2 connected?

Pin 2 has a series capacitor on 4 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the ULC0524P.

What parts are used alongside the ULC0524P?

The LattePanda_Mu, SY8253ADC, TPAZ1023-04F, CH224K and RTL8111H-CG-RH appear in the most repositories here.

Which microcontrollers do boards using the ULC0524P use?

Most are built on Raspberry Pi (1).

How big is a typical board using the ULC0524P?

The median is 146 × 102 mm, and 0% are two-layer designs.

What is the most popular open source board using the ULC0524P?

By GitHub stars, MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.

Can I simulate one of these boards using the ULC0524P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part