6 open source boards using the RTL8111H-CG-RH
Real designs built with the RTL8111H-CG-RH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MXM GPU Card Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm425 parts8LMIT305Lattepanda MOKA
piecol
100 × 70.1 mm207 parts4LCERN-OHL-S-2.035Kicad latte panda mu
futureshocked
170.1 × 100 mm196 parts4LNo license4LattePanda-Mu-Lite-Custom-Carrier
gorkemguven
119.1 × 141.2 mm194 parts4LMIT0Raspberry Pi
Lite Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm252 parts4LMIT305Primer Carrier for LattePanda Mu
LattePandaTeam
146 × 102 mm223 parts4LMIT305
The RTL8111H-CG-RH in open source designs
The gallery holds 6 open source boards using the RTL8111H-CG-RH from 4 GitHub repositories; a typical one measures about 146 × 102 mm and carries around 215 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam.
Parts used alongside the RTL8111H-CG-RH
Microcontrollers on boards using the RTL8111H-CG-RH
What boards using the RTL8111H-CG-RH are built for
RTL8111H-CG-RH: common questions
Where can I find a RTL8111H-CG-RH reference design?
Each of the 6 boards on this page is a real design using the RTL8111H-CG-RH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RTL8111H-CG-RH?
The LattePanda_Mu, ULC0524P, CH224K, D3V3XA4B10LP and LM2734X appear in the most repositories here.
Which microcontrollers do boards using the RTL8111H-CG-RH use?
Most are built on Raspberry Pi (1).
How big is a typical board using the RTL8111H-CG-RH?
The median is 146 × 102 mm, and 0% are two-layer designs.
What is the most popular open source board using the RTL8111H-CG-RH?
By GitHub stars, MXM GPU Card Carrier for LattePanda Mu by LattePandaTeam, with 305 stars.
Can I simulate one of these boards using the RTL8111H-CG-RH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.