Split keyboard
garvita4·split-keyboard·PCB/splitkeybaord .kicad_pcb
About the Split keyboard PCB
Split keyboard is an open source ESP32 PCB design by garvita4, published on GitHub. It is a 2-layer board measuring 166 × 98 mm, with 242 components from 26 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N4R8, from the ESP32 family. Other key parts include the TP4056 and ME6211A33M3G-N. By type, the board carries 68 resistors, 50 switches, 42 LEDs, 42 diodes, 20 capacitors and 6 ICs.
It belongs with the keyboards, power & battery and displays & leds designs in this gallery.
From the project
This is a custom split mechanical keyboard designed from the ground up, combining custom electronics, embedded firmware, and 3D CAD. It brings together programmable controls, displays, RFID-based interactions, rechargeable batteries, and per-key backlighting in one custom-built p
This is a custom split mechanical keyboard designed from the ground up, combining custom electronics, embedded firmware, and 3D CAD. It brings together programmable controls, displays, RFID-based interactions, rechargeable batteries, and per-key backlighting in one custom-built project.
Two separate keyboard halves, each built around its own ESP32-S3 microcontroller and supporting electronics.

Main components on the Split keyboard
Split keyboard bill of materials (BOM)
242 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ESP32-S3-WROOM-1-N4R8 ESPRESSIF(乐鑫) | WIRELM-SMD_ESP32-S3-WROOM-1 | U1, U2 |
| 2 | TP4056 TP4056_C725790 UMW(友台半导体) | ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP | U3, U4 |
| 2 | ME6211A33M3G-N MICRONE(南京微盟) | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U5, U6 |
| 2 | AO3400A AOS | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q2 |
| 2 | TFTTT | PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 2 | BATT | PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | NFC2 | PinHeader_1x08_P2.54mm_Vertical | J7, J8 |
| 2 | SMD1206P050TF/13.2 SMD1206P050TF/13.2_C393935 Yenji Elec | F1206 | F1, F2 |
| 40 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +32 |
| 2 | SW_Push | SW_Cherry_MX_1.50u_PCB | SW41, SW42 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW43, SW44 |
| 2 | reset | SW_SPST_EVQPE1 | SW47, SW49 |
| 2 | boot | SW_SPST_EVQPE1 | SW48, SW50 |
| 2 | SW_Wuerth_450301014042 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW51, SW52 |
| 2 | TYPE-C-31-M-12 韩国韩荣 | USB-C_SMD-TYPE-C-31-M-12_1 | USBC1, USBC2 |
| 2 | TYPE-C-31-M-12 J_LINK 韩国韩荣 | USB-C_SMD-TYPE-C-31-M-12_1 | USBC3, USBC4 |
| 42 | KT-0603W BL KENTO | LED0603-R-RD_WHITE | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +34 |
| 42 | 1N4148WS 1N4148WS T4 CJ(江苏长电/长晶) | SOD-323_L1.8-W1.3-LS2.5-RD | D1, D2, D3, D4, D5, D6, D7, D8 +34 |
| 10 | 10u | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C11, C12 +2 |
| 8 | 100n | C_0805_2012Metric | C7, C8, C9, C10, C15, C16, C19, C20 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1u | C_0805_2012Metric | C17, C18 |
| 42 | 0603WAF1000T5E 0805 UNI-ROYAL(厚声) | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +34 |
| 12 | 10k | R_0805_2012Metric | R43, R44, R47, R48, R55, R56, R57, R58 +4 |
| 8 | 5.1k | R_0805_2012Metric | R45, R46, R51, R52, R61, R62, R63, R64 |
| 2 | 1.2K | R_0805_2012Metric | R49, R50 |
| 4 | 56k | R_0805_2012Metric | R67, R68, R69, R70 |
Split keyboard design files
The KiCad project lives in the garvita4/split-keyboard repository on GitHub; these links point at the commit this page was built from.
Split keyboard: common questions
What microcontroller does the Split keyboard use?
The Split keyboard is built around the ESP32-S3-WROOM-1-N4R8, from the ESP32 family.
How big is the Split keyboard PCB?
The Split keyboard measures 166 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Split keyboard?
242 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Split keyboard design files?
From the garvita4/split-keyboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Split keyboard design in my own project?
The repository has no license, so all rights stay with garvita4. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Split keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k