3 open source boards using the ME6211A33M3G-N

Real designs built with the ME6211A33M3G-N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ME6211A33M3G-N in open source designs

The gallery holds 3 open source boards using the ME6211A33M3G-N from 3 GitHub repositories; a typical one measures about 38.5 × 48.5 mm and carries around 51 components.

67% use four copper layers or more, and 0% carry an open source license.

The most starred is Sim7080 dev board by techstudio-design.

Microcontrollers on boards using the ME6211A33M3G-N

ME6211A33M3G-N: common questions

Where can I find a ME6211A33M3G-N reference design?

Each of the 3 boards on this page is a real design using the ME6211A33M3G-N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ME6211A33M3G-N use?

Most are built on ESP32 (1).

How big is a typical board using the ME6211A33M3G-N?

The median is 38.5 × 48.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the ME6211A33M3G-N?

By GitHub stars, Sim7080 dev board by techstudio-design, with 17 stars.

Can I simulate one of these boards using the ME6211A33M3G-N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part