Geheimbadge controller
Geheimorganisation·geheimbadge-hardware·source/geheimbadge-controller/geheimbadge-controller.kicad_pcb
About the Geheimbadge controller PCB
Geheimbadge controller is an open source ESP32 PCB design by Geheimorganisation, published on GitHub under the MIT license. It is a 2-layer board measuring 75.9 × 74.5 mm, with 73 components from 31 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the XC5011, USBLC6-2SC6, TLV62568DBVR, XT1861B502SR-G and LIS3DH. By type, the board carries 29 resistors, 12 capacitors, 8 transistors, 6 ICs, 5 diodes and 4 connectors.
From the project
Browse the files on KiCanvas - by Stargirl Flowers
Browse the files on KiCanvas - by Stargirl Flowers
Click [](https://github.com/cyber-murmel/kicad-template/generate) to create a new repository and clone it to your machine.
Afterwards commit the changes to your template.
The template makes use of Text Variables. You can edit these in the Schematic or PCB Editor. Go to File > Schematic Setup > Project > Text Variables or File > Board Setup > Text & Graphics > Text Variables respectively. In there you can change properties like project ID, revision, author and company name. These then automatically get updated throughout all file and…
Main components on the Geheimbadge controller
Geheimbadge controller bill of materials (BOM)
73 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC5011 | TSOT-23-5 | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | TLV62568DBVR | SOT-23-5 | U3 |
| 1 | XT1861B502SR-G | SOT-23-5 | U4 |
| 1 | ESP32-C3-MINI-1-N4 | WIFIM-SMD_ESP32-C3-MINI-1 | U5 |
| 1 | LIS3DH | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U6 |
| 2 | AO3400A | SOT-23 | Q1, Q8 |
| 2 | MMDT3906 | SOT-363_SC-70-6 | Q2, Q5 |
| 4 | AO3401A | SOT-23 | Q3, Q4, Q6, Q7 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x06 | PinSocket_1x06_P2.54mm_Horizontal | J2, J4 |
| 1 | SAOv2 | PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_MountingPin | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | Pmod_voltage | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | INT1 | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | INT2 | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3 |
| 1 | PWR | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | BOOT | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | RESET | SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | LED | LED_0603_1608Metric | D1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1N4148WS | D_SOD-323 | D2, D3, D4, D5 |
| 2 | 10uH | L_Chilisin_BMRx00060630 | L1, L2 |
| 8 | 10u | C_0805_2012Metric | C1, C4, C5, C6, C7, C8, C9, C11 |
| 4 | 100n | C_0603_1608Metric | C2, C3, C10, C12 |
| 10 | 10k | R_0603_1608Metric | R1, R3, R8, R19, R22, R23, R24, R27 +2 |
| 1 | 470 | R_0603_1608Metric | R2 |
| 2 | 5.1k | R_0603_1608Metric | R4, R5 |
| 1 | 100k | R_0603_1608Metric | R6 |
| 4 | 820k | R_0603_1608Metric | R7, R14, R16, R17 |
| 5 | 180k | R_0603_1608Metric | R9, R11, R13, R15, R18 |
| 6 | 10 | R_0603_1608Metric | R10, R12, R20, R21, R25, R26 |
Geheimbadge controller design files
The KiCad project lives in the Geheimorganisation/geheimbadge-hardware repository on GitHub; these links point at the commit this page was built from.
Geheimbadge controller: common questions
What microcontroller does the Geheimbadge controller use?
The Geheimbadge controller is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.
How big is the Geheimbadge controller PCB?
The Geheimbadge controller measures 75.9 × 74.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Geheimbadge controller?
73 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Geheimbadge controller design files?
From the Geheimorganisation/geheimbadge-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Geheimbadge controller design in my own project?
Yes, under the terms of its MIT license, which Geheimorganisation chose for the repository.
Can I test firmware for the Geheimbadge controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in geheimbadge-hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k