SAPPHIRE
About the SAPPHIRE PCB
SAPPHIRE is an open source ESP32 PCB design by GemsErasmusPlus, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 90 × 40 mm, with 36 components from 23 distinct parts.
Its main chip is the ESP32-S3-WROOM, from the ESP32 family. Other key parts include the R1170H331B, USBLC6-2SC6 and TCAN332DR. By type, the board carries 10 resistors, 9 capacitors, 4 ICs, 3 connectors, 3 switches and 2 diodes.
From the project
electronics design for the GEMS educational hardware
Project GEMS - Graceful Equalising of Mechatronics Students aims to develop affordable educational hardware for mechatronics students, along with supporting online courses and tutorials. This will allow all students to have equal learning opportunities, regardless of their background or learning needs.
Main components on the SAPPHIRE
SAPPHIRE bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R1170H331B | SOT-89-5 | U1 |
| 1 | ESP32-S3-WROOM | ESP32-S3-WROOM | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | TCAN332DR | SOIC-8 | U4 |
| 1 | DMG2305UX-13 | SOT-23 | Q1 |
| 1 | USB_C_USB2.0 | USB-C_MOLEX-216990-0001 | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Buzzer | CPT-1117-83-SMT | BZ1 |
| 2 | CAN_connector | IDC8_Micro-MaTch | CAN1, CAN2 |
| 1 | MDOB128032GV-WI | MDOB128032GV-WI | Displ1 |
| 1 | BTN | SW_PUSH_6mm_SMD | SW1 |
| 1 | RST | SW_PUSH_6mm_SMD | SW2 |
| 1 | USR | SW_PUSH_6mm_SMD | SW3 |
| 1 | XBS306 | DO-214_(SMA) | D1 |
| 1 | Green | LED_D3.0mm | D2 |
| 3 | 10uF | C_1206_(3216) | C1, C3, C4 |
| 6 | 0.1uF | C_1206_(3216) | C2, C5, C6, C7, C8, C9 |
| 4 | 100k | R_1206_(3216) | R1, R2, R4, R8 |
| 1 | 240 | R_1206_(3216) | R3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1k | R_1206_(3216) | R5, R6 |
| 1 | 1M | R_1206_(3216) | R7 |
| 2 | 2.2k | R_1206_(3216) | R9, R10 |
SAPPHIRE design files
The KiCad project lives in the GemsErasmusPlus/GEMS_Electronics repository on GitHub; these links point at the commit this page was built from.
SAPPHIRE: common questions
What microcontroller does the SAPPHIRE use?
The SAPPHIRE is built around the ESP32-S3-WROOM, from the ESP32 family.
How big is the SAPPHIRE PCB?
The SAPPHIRE measures 90 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SAPPHIRE?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the SAPPHIRE design files?
From the GemsErasmusPlus/GEMS_Electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SAPPHIRE design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which GemsErasmusPlus chose for the repository.
Can I test firmware for the SAPPHIRE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in GEMS_Electronics
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k