Cv in
GKeyMaster·eurorack_blocks·blocks/cv-in/cv-in.kicad_pcb
About the Cv in PCB
Cv in is an open source PCB design by GKeyMaster, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 25 × 19 mm, with 13 components from 13 distinct parts.
Other key parts include the MCP6001U. By type, the board carries 4 resistors, 3 connectors, 3 capacitors, 2 diodes and 1 IC.
It belongs with the audio designs in this gallery.
From the project
This block is a simple analog CV input. Its design is detailed here.
This block is a simple analog CV input. Its design is detailed here.
- This block needs its GND to be connected to the ground. All GND pins are connected internally, - This block needs its -12V to be connected to the -12V of the power-bus, - This block needs its 3V3A to be connected to the Daisy Seed 3V3 Analog Power I/O on Pin 21, - The NOP pin can be either connected to: - GND to send (slightly noisy) zeros to the software implementation, - Cascading the DI signal from another cv-in block, - A pseudo-random predefined signal to detect a jack connection as explained on the Mutable…

Main components on the Cv in
Cv in bill of materials (BOM)
13 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6001U | SOT-23-5 | U1 |
| 1 | IN | ThonkiconnJack | J1 |
| 1 | OUT | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | POWER | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | D_TVS | R_0603_1608Metric | D1 |
| 1 | LM4040DBZ-10 | SOT-23 | D2 |
| 1 | 33n | C_0805_2012Metric | C1 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 1 | 100n | C_0603_1608Metric | C3 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 1 | 120k | R_0603_1608Metric | R2 |
| 1 | 20k | R_0603_1608Metric | R3 |
| 1 | 4.99k | R_0603_1608Metric | R4 |
Cv in design files
The KiCad project lives in the GKeyMaster/eurorack_blocks repository on GitHub; these links point at the commit this page was built from.
Cv in: common questions
How big is the Cv in PCB?
The Cv in measures 25 × 19 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cv in?
13 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cv in design files?
From the GKeyMaster/eurorack_blocks repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cv in design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which GKeyMaster chose for the repository.
More boards in eurorack_blocks
Kivu12
GKeyMaster
59.6 × 109.5 mm135 parts2LCC-BY-SA-4.00Panel daisy
GKeyMaster
148 × 84.5 mm20 parts2LCC-BY-SA-4.00Audio in daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Audio out daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Power bus
GKeyMaster
37 × 21.5 mm9 parts2LCC-BY-SA-4.00Regulator daisy
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate in
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate out
GKeyMaster
20 × 19 mm7 parts2LCC-BY-SA-4.00Slider
GKeyMaster
17 × 35.5 mm7 parts2LCC-BY-SA-4.00Trim
GKeyMaster
17 × 19 mm5 parts2LCC-BY-SA-4.00Multiplexer
GKeyMaster
22 × 19 mm5 parts2LCC-BY-SA-4.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687