Panel daisy
GKeyMaster·eurorack_blocks·blocks/kits/panel-daisy.kicad_pcb
About the Panel daisy PCB
Panel daisy is an open source PCB design by GKeyMaster, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 148 × 84.5 mm, with 20 components from 18 distinct parts.
Other key parts include the MCP6001U. By type, the board carries 5 resistors, 4 capacitors, 3 connectors, 2 diodes, 2 inductors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
This contains "kits" as panels of the most used block for the most popular digital modules.
This contains "kits" as panels of the most used block for the most popular digital modules.
Blocks are collected into panels to reduce the cost of producing one panel. The more panels are ordered, the more it is going to fit any configuration of modules: - 1 panel is a good setup to start with, covering all simplest needs, - 2 panels are an excellent setup to cover about any cases, - 3 panels cover every use, except for very specific ones.

Main components on the Panel daisy
Panel daisy bill of materials (BOM)
20 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6001U | SOT-23-5 | U1 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | OUT | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | 3V3 | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | 100k | SongHueiTallTrim9 | RV1 |
| 1 | SW_Push_Dual | SW_PUSH_6mm_H7.3mm | SW1 |
| 1 | D_TVS | R_0603_1608Metric | D1 |
| 1 | LM4040 | SOT-23 | D2 |
| 1 | 33u | L_0805_2012Metric | L1 |
| 1 | FB | L_0603_1608Metric | L2 |
| 3 | 100n | C_0603_1608Metric | C1, C3, C4 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 1 | 120k | R_0603_1608Metric | R2 |
| 1 | 20k | R_0603_1608Metric | R3 |
| 1 | 4.99k | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
Panel daisy design files
The KiCad project lives in the GKeyMaster/eurorack_blocks repository on GitHub; these links point at the commit this page was built from.
Panel daisy: common questions
How big is the Panel daisy PCB?
The Panel daisy measures 148 × 84.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel daisy?
20 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Panel daisy design files?
From the GKeyMaster/eurorack_blocks repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Panel daisy design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which GKeyMaster chose for the repository.
More boards in eurorack_blocks
Kivu12
GKeyMaster
59.6 × 109.5 mm135 parts2LCC-BY-SA-4.00Cv in
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Audio out daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Audio in daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Power bus
GKeyMaster
37 × 21.5 mm9 parts2LCC-BY-SA-4.00Regulator daisy
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate in
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate out
GKeyMaster
20 × 19 mm7 parts2LCC-BY-SA-4.00Slider
GKeyMaster
17 × 35.5 mm7 parts2LCC-BY-SA-4.00Trim
GKeyMaster
17 × 19 mm5 parts2LCC-BY-SA-4.00Multiplexer
GKeyMaster
22 × 19 mm5 parts2LCC-BY-SA-4.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687