Kivu12
GKeyMaster·eurorack_blocks·boards/kivu12/kivu12.kicad_pcb
About the Kivu12 PCB
Kivu12 is an open source PCB design by GKeyMaster, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 59.6 × 109.5 mm, with 135 components from 40 distinct parts.
Other key parts include the 4051, 4021, PCA9685PW and TL072. By type, the board carries 59 resistors, 20 diodes, 12 connectors, 10 capacitors, 8 jumpers and 6 ICs.
It belongs with the audio designs in this gallery.
From the project
kivu12 is a board used for 12HP modules.
kivu12 is a board used for 12HP modules.
The 12HP kivu12 board is designed to host, at the bottom of the module, 12 standard Eurorack 3.5mm jacks connectors, and/or trimmer potentiometers typically used to represent attenuverters, distributed into 3 rows.
The rest of the module UI then goes at the top. The pin headers layout on the left and right side don't allow to place small UI controls too close to the border. The pin header on the top doesn't allow to place jack connectors, as it is typically done in sequencer modules.

Main components on the Kivu12
Kivu12 bill of materials (BOM)
135 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4051 | TSSOP-16_4.4x5mm_P0.65mm | U1, U2 |
| 2 | 4021 | TSSOP-16_4.4x5mm_P0.65mm | U3, U4 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U6 |
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | POWER BUS | IDC-Header_2x05_P2.54mm_Vertical | J0 |
| 1 | P1 | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | CIX | PinSocket_1x09_P2.54mm_Vertical | J2 |
| 2 | BX | PinSocket_1x08_P2.54mm_Vertical | J3, J7 |
| 1 | LX1 | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | ANALOG | PinSocket_1x10_P2.54mm_Vertical | J5 |
| 1 | POWER2 | PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | POWER1 | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | SD | PinSocket_1x06_P2.54mm_Vertical | J10 |
| 1 | GND | PinSocket_1x02_P2.54mm_Vertical | J11 |
| 1 | LX2 | PinSocket_1x08_P2.54mm_Vertical | J12 |
| 1 | DaisyPatchSm_Rev1 | DaisyPatchSm | DPSM1 |
| 4 | DPSM Header | Empty | Dummy1, Dummy2, Dummy3, Dummy4 |
| 1 | Big Pin Header | Empty | Dummy5 |
| 8 | Jumper | Empty | Dummy6, Dummy7, Dummy8, Dummy9, Dummy10, Dummy11, Dummy12, Dummy13 |
| 3 | ToolingHole | JlcPcbToolingHole | H2, H3, H4 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Jumper | PinHeader_1x03_P2.54mm_Vertical | JP3, JP4 |
| 1 | CLK | PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | CMD | PinHeader_1x03_P2.54mm_Vertical | JP6 |
| 1 | D0 | PinHeader_1x03_P2.54mm_Vertical | JP7 |
| 1 | D1 | PinHeader_1x03_P2.54mm_Vertical | JP8 |
| 1 | D2 | PinHeader_1x03_P2.54mm_Vertical | JP9 |
| 1 | D3 | PinHeader_1x03_P2.54mm_Vertical | JP10 |
| 1 | Micro_SD_Card | microSD_HC_Wuerth_693072010801 | JSD1 |
| 17 | BAT54SW | SOT-323_SC-70 | D1, D2, D3, D4, D5, D6, D7, D8 +9 |
| 1 | LM4040DBZ-5 | SOT-23 | D22 |
| 2 | D_Schottky | D_SOD-123 | D23, D24 |
| 2 | Ferrite_Bead | L_0603_1608Metric | L1, L2 |
| 2 | 10u | C_0805_2012Metric | C1, C2 |
| 7 | 100n | C_0603_1608Metric | C3, C4, C5, C6, C8, C11, C12 |
| 1 | 1u | C_0603_1608Metric | C13 |
| 18 | 1K | R_0603_1608Metric | R1, R2, R44, R45, R46, R47, R48, R49 +10 |
| 22 | 100k | R_0603_1608Metric | R4, R5, R6, R7, R8, R14, R15, R16 +14 |
| 1 | 4.99k | R_0603_1608Metric | R76 |
| 2 | 4.7k | R_0603_1608Metric | R79, R80 |
| 16 | 1M | R_0603_1608Metric | R84, R85, R86, R87, R88, R89, R90, R91 +8 |
Kivu12 design files
The KiCad project lives in the GKeyMaster/eurorack_blocks repository on GitHub; these links point at the commit this page was built from.
- Layoutboards/kivu12/kivu12.kicad_pcb
- Schematicboards/kivu12/kivu12.kicad_sch
Kivu12: common questions
How big is the Kivu12 PCB?
The Kivu12 measures 59.6 × 109.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kivu12?
135 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kivu12 design files?
From the GKeyMaster/eurorack_blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kivu12 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which GKeyMaster chose for the repository.
More boards in eurorack_blocks
Panel daisy
GKeyMaster
148 × 84.5 mm20 parts2LCC-BY-SA-4.00Cv in
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Audio out daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Audio in daisy
GKeyMaster
25 × 19 mm13 parts2LCC-BY-SA-4.00Power bus
GKeyMaster
37 × 21.5 mm9 parts2LCC-BY-SA-4.00Regulator daisy
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate in
GKeyMaster
20 × 19 mm8 parts2LCC-BY-SA-4.00Gate out
GKeyMaster
20 × 19 mm7 parts2LCC-BY-SA-4.00Slider
GKeyMaster
17 × 35.5 mm7 parts2LCC-BY-SA-4.00Trim
GKeyMaster
17 × 19 mm5 parts2LCC-BY-SA-4.00Multiplexer
GKeyMaster
22 × 19 mm5 parts2LCC-BY-SA-4.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687