PCB-for-IoT-enabled-Indoor-Air-Purification-System

gokul-rm·PCB-for-IoT-enabled-Indoor-Air-Purification-System·AIR/AIR.kicad_pcb

PCB-for-IoT-enabled-Indoor-Air-Purification-System layout, top view — open source ESP32 board by gokul-rm

About the PCB-for-IoT-enabled-Indoor-Air-Purification-System

PCB-for-IoT-enabled-Indoor-Air-Purification-System is an open source ESP32 PCB design by gokul-rm, published on GitHub. It is a 2-layer board measuring 63 × 72 mm, with 24 components from 19 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the TLV61046ADBVR, INA219BIDR and BME680. By type, the board carries 8 resistors, 6 capacitors, 4 ICs, 2 switches, 1 connector and 1 battery holder.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

This repository contains the PCB design files for an IoT-enabled Indoor Air Purification System. The system is designed to monitor and improve indoor air quality by integrating various sensors and actuators. The PCB facilitates the seamless connection of components such as air qu

This repository contains the PCB design files for an IoT-enabled Indoor Air Purification System. The system is designed to monitor and improve indoor air quality by integrating various sensors and actuators. The PCB facilitates the seamless connection of components such as air quality sensors, microcontrollers, and purification units.

- Air Quality Monitoring: Integrates sensors to detect pollutants like PM2.5, CO₂, and VOCs. - IoT Connectivity: Supports Wi-Fi/Bluetooth modules for real-time data transmission. - Automated Control: Enables automatic activation of purification mechanisms based…

Main components on the PCB-for-IoT-enabled-Indoor-Air-Purification-System

PCB-for-IoT-enabled-Indoor-Air-Purification-System bill of materials (BOM)

24 components, 19 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32D
U1
1
TLV61046ADBVR
U2
1
INA219BIDR
U3
1
BME680
U4
1
Conn_01x04_Pin
P1
1
Battery
BT1
2
SW_Push_Dual
SW1, SW2
1
LED
D1
1
L
L1
4
100nF
C1, C4, C5, C6
1
4.7uf
C2
1
3nf
C3
2
10K
R1, R2
1
100m
R3
1
3.3k
R4
1
3.3k
R5
1
R
R6
1
R
R7
1
R
R8

PCB-for-IoT-enabled-Indoor-Air-Purification-System design files

The KiCad project lives in the gokul-rm/PCB-for-IoT-enabled-Indoor-Air-Purification-System repository on GitHub; these links point at the commit this page was built from.

PCB-for-IoT-enabled-Indoor-Air-Purification-System: common questions

What microcontroller does the PCB-for-IoT-enabled-Indoor-Air-Purification-System use?

The PCB-for-IoT-enabled-Indoor-Air-Purification-System is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the PCB-for-IoT-enabled-Indoor-Air-Purification-System?

The PCB-for-IoT-enabled-Indoor-Air-Purification-System measures 63 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-for-IoT-enabled-Indoor-Air-Purification-System?

24 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB-for-IoT-enabled-Indoor-Air-Purification-System design files?

From the gokul-rm/PCB-for-IoT-enabled-Indoor-Air-Purification-System repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB-for-IoT-enabled-Indoor-Air-Purification-System design in my own project?

The repository has no license, so all rights stay with gokul-rm. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB-for-IoT-enabled-Indoor-Air-Purification-System without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards