Esp miniarm

Gray-Stone·esp-miniarm·DC_servo_joint/DC_servo_joint.kicad_pcb

Esp miniarm PCB layout, top view — open source ESP32 board by Gray-Stone

About the Esp miniarm PCB

Esp miniarm is an open source ESP32 PCB design by Gray-Stone, published on GitHub. It is a 2-layer board measuring 58.5 × 50 mm, with 49 components from 35 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AS5600, SP3485EN and TPS563200. By type, the board carries 16 capacitors, 7 resistors, 6 diodes, 4 ICs, 2 switches and 1 inductor.

It belongs with the robotics & motion designs in this gallery.

Main components on the Esp miniarm

Esp miniarm bill of materials (BOM)

49 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AS5600
U1
1
ESP32-C3-WROOM-02
U2
1
SP3485EN
MaxLinear
U3
1
TPS563200
U5
2
B3B-XH-A(LF)(SN)
B3B-XH-A_LF__SN_
JST Sales America Inc.
J_BUS1, J_BUS2
1
B2B-XH-A(LF)(SN)
B2B-XH-A_LF__SN_
JST Sales America Inc.
J_MOT1
1
NTC 10K
J_NTC1
2
B2P-VH(LF)(SN)
B2P-VH_LF__SN_
JST Sales America Inc.
J_PWR1, J_PWR2
1
USB_PAD
J_USB1
1
0.05ohm
R_SHUT2
1
120
R_TERM_1
2
4.7kΩ
UNI-ROYAL(Uniroyal Elec)
R_i2c1, R_i2c2
1
RST_BTM
XUNPU
S1
1
C720477
BOOT_BTM
XUNPU
S2
1
INA219AxDCN
U_6
1
DRV8871DDA
U_MOTOR_1
1
SMBJ6.5CA
hongjiacheng
D1
2
H15VL10B
hongjiacheng
D2, D4
2
SS34
MDD(Microdiode Electronics)
D3, D5
1
C2286
Red
Hubei KENTO Elec
D6
Show 15 more
QtyPartRefs
1
2.2UH
2.2uH
L1
2
4.7UF
4.7uF
FH(Guangdong Fenghua Advanced Tech)
C1, C17
1
220NF
220nF
FH(Guangdong Fenghua Advanced Tech)
C2
2
22UF
22uF
Samsung Electro-Mechanics
C3, C10
6
100NF
100nF
YAGEO
C4, C6, C7, C12, C13, C16
1
100NF
100nF
Samsung Electro-Mechanics
C5
1
10NF
10nF
FH(Guangdong Fenghua Advanced Tech)
C8
1
10UF
10uF
Samsung Electro-Mechanics
C9
1
10UF
10uF
Samsung Electro-Mechanics
C14
1
47UF
47uF
C15
1
33kΩ
UNI-ROYAL(Uniroyal Elec)
R1
3
10kΩ
UNI-ROYAL(Uniroyal Elec)
R2, R5, R7
1
68kΩ
UNI-ROYAL(Uniroyal Elec)
R3
1
10kΩ
UNI-ROYAL(Uniroyal Elec)
R4
1
1kΩ
UNI-ROYAL(Uniroyal Elec)
R6

Esp miniarm design files

The KiCad project lives in the Gray-Stone/esp-miniarm repository on GitHub; these links point at the commit this page was built from.

Esp miniarm: common questions

What microcontroller does the Esp miniarm use?

The Esp miniarm is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Esp miniarm PCB?

The Esp miniarm measures 58.5 × 50 mm, has 2 copper layers and is 1.69 mm thick.

How many components are on the Esp miniarm?

49 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp miniarm design files?

From the Gray-Stone/esp-miniarm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp miniarm design in my own project?

The repository has no license, so all rights stay with Gray-Stone. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp miniarm without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards