ESP-Home-Capacitive-Rain-Sensor
Heronidas·ESP-Home-Capacitive-Rain-Sensor·hardware/regensensor.kicad_pcb
About the ESP-Home-Capacitive-Rain-Sensor PCB
ESP-Home-Capacitive-Rain-Sensor is an open source ESP32 PCB design by Heronidas, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 100 × 70 mm, with 28 components from 19 distinct parts.
Its main chip is the ESP32 D1 mini, from the ESP32 family. Other key parts include the XL6009 module, HTU21D and SN74HC14DR. By type, the board carries 9 resistors, 7 connectors, 7 capacitors, 4 ICs and 1 transistor.
It belongs with the iot & wireless, sensors and dev boards & breakouts designs in this gallery.
From the project
Heated capacitive rain sensor for Home Assistant: RC-SPC1KA, ESP32 carrier board, ESPHome firmware
A heated, sealed rain sensor for Home Assistant that tells rain from dew and fog. RC-SPC1KA sensor element · ESP32 carrier board · ESPHome firmware
Features · Status · Get started · Documentation · License
Affordable rain sensors use contact grids that corrode within a season, or tipping buckets that report once a measurable amount of water has fallen. Off-the-shelf Zigbee and Wi-Fi rain sensors give you rain: yes/no and no way to fix it when they report morning dew as rain.

Main components on the ESP-Home-Capacitive-Rain-Sensor
ESP-Home-Capacitive-Rain-Sensor bill of materials (BOM)
28 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 D1 mini | ESP32_MiniKit | U1 |
| 1 | XL6009 module | XL6009_Module | U2 |
| 1 | HTU21D | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U3 |
| 1 | SN74HC14DR | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | AOD4184A | TO-252-2 | Q1 |
| 1 | 5V_IN_GND_BAT | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | RC-SPC1KA_SENSE | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | RC-SPC1KA_HEATER | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | I2C_SOCKET | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | I2C_HEADER | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | I2C_SENSOR | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J6 |
| 1 | EXPANSION | PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | 1000u/16V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 6 | 100N 100n | C_0805_2012Metric | C2, C3, C6, C7, C8, C9 |
| 1 | 47K 47k | R_0805_2012Metric | R1 |
| 2 | 5.6K 5.6k | R_0805_2012Metric | R2, R3 |
| 3 | 100K 100k | R_0603_1608Metric | R7, R9, R10 |
| 1 | 100R | R_0805_2012Metric | R8 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R11, R12 |
ESP-Home-Capacitive-Rain-Sensor design files
The KiCad project lives in the Heronidas/ESP-Home-Capacitive-Rain-Sensor repository on GitHub; these links point at the commit this page was built from.
ESP-Home-Capacitive-Rain-Sensor: common questions
What microcontroller does the ESP-Home-Capacitive-Rain-Sensor use?
The ESP-Home-Capacitive-Rain-Sensor is built around the ESP32 D1 mini, from the ESP32 family.
How big is the ESP-Home-Capacitive-Rain-Sensor PCB?
The ESP-Home-Capacitive-Rain-Sensor measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP-Home-Capacitive-Rain-Sensor?
28 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP-Home-Capacitive-Rain-Sensor design files?
From the Heronidas/ESP-Home-Capacitive-Rain-Sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP-Home-Capacitive-Rain-Sensor design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the ESP-Home-Capacitive-Rain-Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k