2 open source boards using the XL6009 module

Real designs built with the XL6009 module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The XL6009 module in open source designs

The gallery holds 2 open source boards using the XL6009 module from 2 GitHub repositories; a typical one measures about 156.8 × 98.8 mm and carries around 91 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Zuendbox v3 32 by fixxl.

Microcontrollers on boards using the XL6009 module

What boards using the XL6009 module are built for

XL6009 module: common questions

Where can I find a XL6009 module reference design?

Each of the 2 boards on this page is a real design using the XL6009 module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the XL6009 module use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the XL6009 module?

The median is 156.8 × 98.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the XL6009 module?

By GitHub stars, Zuendbox v3 32 by fixxl, with 10 stars.

Can I simulate one of these boards using the XL6009 module before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part