HardLabs

NxtPX4V2

HertZhang·ardupilot-schematics·HKUST-UAV-Group/NxtPX4v2/NxtPX4.kicad_pcb

NxtPX4V2 PCB layout, top view — open source STM32 board by HertZhang

About the NxtPX4V2 PCB

NxtPX4V2 is an open source STM32 PCB design by HertZhang, published on GitHub. It is a 4-layer board measuring 33 × 27 mm, with 122 components from 61 distinct parts.

Its main chip is the STM32H743VIH6, from the STM32 family. Other key parts include the MP9943GQ-Z, RT9013-33GB, SPL06, BMI088 and W25Q128JVS. By type, the board carries 44 capacitors, 37 resistors, 14 diodes, 11 connectors, 10 ICs and 2 crystals.

From the project

The schematics in this directory are from:

The schematics in this directory are from:

https://github.com/HKUST-Aerial-Robotics/Nxt-FC

Please see that repository for the master copies.

Main components on the NxtPX4V2

MP9943GQ-ZRT9013-33GBSTM32H743VIH6SPL06BMI088W25Q128JVSSN74LVC1G86DCKR

NxtPX4V2 bill of materials (BOM)

122 components, 61 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MP9943GQ-Z
U1, U4
2
RT9013-33GB
U2, U3
1
STM32H743VIH6
U11
1
SPL06
U13
2
BMI088
U14, U15
1
W25Q128JVS
U16
1
SN74LVC1G86DCKR
U19
1
AP40P05
Q1
1
SG-210STF/ X1G004171002700
Y1
1
ABS07 (32.768kHZ)
Y2
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
DJIO3
J2
1
GPS
J3
1
UART2
J4
2
Upper computer connector
J5, J7
1
ESC
J6
1
PWM_AUX
J8
1
Micro_SD_Card
J10
1
Debug
J11
1
AuxGPIO
J12
Show 41 more
QtyPartRefs
1
TD-1183SN-1.5H(3x2.5)
BOOT1
1
PESD12VV1BL
D1
2
PESD5V0F1BL
D2, D4
1
SMF30CA(30V)
D3
2
DSS34(3A 500mV)
D5, D7
1
BZX584C9V1
D6
5
LED_Blue(0201)
D8, D9, D10, D11, D13
1
LED_RED(0201)
D12
1
LED_Green(0201)
D14
2
10uH(0420)(78438357100)
L1, L2
4
22uF(0805 35V 20%)
C1, C3, C12, C13
1
10uF(0603 35V 20%)
C2
2
1uF(0402 35V 10%)
C4, C8
3
1uF(0402 16V 10%)
C5, C6, C9
13
100nF(0201 10V 10%)
C7, C10, C16, C18, C19, C20, C33, C34 +5
1
100nF(0201 16V 10%)
C11
2
1uF(0402 10V 10%)
C14, C15
2
100nF(0201 25V 10%)
C17, C21
1
100nF(0201 10.0V 10%)
C22
3
22uF(0603 16V)
C23, C24, C26
2
2.2uF(0402 6.3V 10%)
C27, C28
1
4.7uF(0402 10V)
C29
1
15pF(0201 10V)
C30
1
100nF(0201 6.3V)
C31
1
1uF(0201 6.3V)
C32
2
12.0pF(0201 10V)
C35, C36
4
100.0nF(0201 10V)
C41, C42, C44, C45
2
5.1kR(0201)
R1, R2
2
1MR(0402 50V)
R3, R5
2
100kR(0201 25V)
R4, R6
1
100kR(0201 50V)
R7
2
20R(0201 25V)
R8, R10
2
51kR(0201 25V)
R9, R12
1
7.68kR(0201 25V)
R11
2
41.2kR(0201 25V)
R13, R17
1
200.0kR(0201 50V)
R14
1
22.0kR(0201 50V)
R15
1
2.90k-4.02kR(0201 25V) / 3k for 12V
R16
12
10kR(0201)
R18, R19, R20, R23, R27, R28, R31, R32 +4
1
20kR(0201 9V)
R21
7
10.0kR(0201)
R24, R25, R26, R29, R30, R36, R37

NxtPX4V2 design files

The KiCad project lives in the HertZhang/ardupilot-schematics repository on GitHub; these links point at the commit this page was built from.

NxtPX4V2: common questions

What microcontroller does the NxtPX4V2 use?

The NxtPX4V2 is built around the STM32H743VIH6, from the STM32 family.

How big is the NxtPX4V2 PCB?

The NxtPX4V2 measures 33 × 27 mm, has 4 copper layers and is 0.982 mm thick.

How many components are on the NxtPX4V2?

122 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NxtPX4V2 design files?

From the HertZhang/ardupilot-schematics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NxtPX4V2 design in my own project?

The repository has no license, so all rights stay with HertZhang. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the NxtPX4V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ardupilot-schematics

Similar boards