12 open source boards using the STM32H743VIH6
Real designs built with the STM32H743VIH6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NxtPX4V2
ArduPilot
33 × 27 mm122 parts4LNo license244STM32
LEVIA-H7
piecol
39.5 × 39.5 mm133 parts6LCERN-OHL-S-2.068STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00STM32
FC AniH743
CosShin
50 × 45 mm124 parts4LMIT0STM32
ArduH743-fc
KingFish233
38 × 38 mm123 parts4LNo license0STM32
NxtPX4V2
HertZhang
33 × 27 mm122 parts4LNo license0STM32
EuroFly
GigelBosket
38.6 × 38.6 mm99 parts4LCERN-OHL-P-2.00STM32
V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00STM32
Droneboard
nikola825
38 × 38 mm63 parts4LMIT3STM32
V1.1 version control
PranavNedunghat
66 × 8.8 mm473 parts8LApache-2.00STM32
V1.1 XT30 version
PranavNedunghat
4.5 × 57.9 mm473 parts8LApache-2.00STM32
V1.2
PranavNedunghat
66 × 8.8 mm471 parts8LApache-2.00
How designs wire the STM32H743VIH6
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the STM32H743VIH6 connects to, and the resistors, capacitors and other passives placed on it.
- The PH0-OSC_IN pin has a crystal on 8 of 8 designs, most often 8 MHz.
- The VDD pins have a capacitor to GND on 8 of 8 designs, most often 100 nF (then 4.7 µF).
- The NRST pin has a capacitor to GND on 8 of 8 designs, most often 100 nF.
- The VCAP pins have a capacitor to GND on 8 of 8 designs, most often 2.2 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PC14-OSC32_INpin A1 | Connected to: Signal 63% · not connected 25% |
|
| PB7pin A5 | Connected to: SPL06 50% |
|
| PC15-OSC32_OUTpin B1 | Connected to: Signal 88% |
|
| VBATpin B2 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% |
|
| PB6pin B5 | Connected to: SPL06 50% |
|
| PD2pin B7 | Connected to: A connector 88% |
|
| PC11pin B8 | Connected to: A connector 75% |
|
| PC10pin B9 | Connected to: A connector 88% |
|
| PH0-OSC_INpin C1 | Connected to: Signal 100% |
|
| VSSpin C2, E4, E5, E6, J1 | Connected to: GND 100% | — |
| PH1-OSC_OUTpin D1 | Connected to: Not connected 50% · a signal 50% |
|
| VDDpin D2, F5, K1 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% · VDD 25% |
|
| BOOT0pin D5 | Connected to: Signal 100% |
|
| PD7pin D6 | Connected to: Not connected 63% · a signal 25% | — |
| PD0pin D8 | Connected to: BMI088 50%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% |
|
| PA8pin D9 | Connected to: Not connected 63% · a signal 25% | — |
| NRSTpin E1 | Connected to: Signal 100% |
|
| VCAPpin E7, F8 | Connected to: Signal 100% |
|
| PD1pin E8 | Connected to: Not connected 63% · a signal 25% | — |
| PC9pin E9 | Connected to: A connector 75% |
|
| VDDLDOpin F4 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% · VDD 25% |
|
| VDD33USBpin F6 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% · VDD 25% |
|
| PDR_ONpin F7 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% |
|
| PC8pin F9 | Connected to: A connector 88% |
|
| VSSApin G1 | Connected to: GND 100% | — |
| PC4pin G4 | Connected to: Signal 63% · not connected 25% |
|
| PE10pin G6 | Connected to: Not connected 75% | — |
| VDDApin H1 | Connected to: BMI088 63%, RT9013-33GB 50%, SN74LVC1G86DCKR 50% · VDDA 25% |
|
| PE15pin H7 | Connected to: Not connected 63% · a signal 38% | — |
| PD14pin H8 | Connected to: SN74LVC1G86DCKR 50% |
|
| PD10pin H9 | Connected to: Not connected 75% | — |
| PE8pin J5 | Connected to: Not connected 75% · a signal 25% | — |
| PD13pin J10 | Connected to: A connector 63% |
|
| PD12pin K10 | Connected to: A connector 63% |
|
59 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NxtPX4V2 by ArduPilot, LEVIA-H7 by piecol, Droneboard by nikola825 and FC AniH743 by CosShin.
The STM32H743VIH6 in open source designs
The gallery holds 12 open source boards using the STM32H743VIH6 from 8 GitHub repositories; a typical one measures about 39.1 × 38 mm and carries around 129 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is NxtPX4V2 by ArduPilot.
Parts used alongside the STM32H743VIH6
Microcontrollers on boards using the STM32H743VIH6
What boards using the STM32H743VIH6 are built for
STM32H743VIH6: common questions
Where can I find a STM32H743VIH6 reference design?
Each of the 12 boards on this page is a real design using the STM32H743VIH6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32H743VIH6 PH0-OSC_IN pin connected?
The PH0-OSC_IN pin has a crystal on 8 of 8 designs, most often 8 MHz. Counted from the KiCad layouts of 8 open source designs using the STM32H743VIH6.
How is the STM32H743VIH6 VDD pin connected?
The VDD pins have a capacitor to GND on 8 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the STM32H743VIH6.
How is the STM32H743VIH6 NRST pin connected?
The NRST pin has a capacitor to GND on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the STM32H743VIH6.
What parts are used alongside the STM32H743VIH6?
The BMI088, RT9013-33GB, W25Q128JVS, MP9943GQ-Z and SN74LVC1G86DCKR appear in the most repositories here.
Which microcontrollers do boards using the STM32H743VIH6 use?
Most are built on STM32 (12).
How big is a typical board using the STM32H743VIH6?
The median is 39.1 × 38 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32H743VIH6?
By GitHub stars, NxtPX4V2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the STM32H743VIH6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.