15 open source boards using the MP9943GQ-Z

Real designs built with the MP9943GQ-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the MP9943GQ-Z

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MP9943GQ-Z connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a capacitor to GND on 11 of 11 designs, most often 100 nF.
  • The SW pin has a series capacitor on 11 of 11 designs, most often 100 nF.
  • The SW pin has a inductor on 11 of 11 designs, most often 10 µH (then 15 µH).
  • The FB pin has a series resistor on 10 of 11 designs, most often 51 kΩ.
FBpin 1Connected to: Signal 100%
  • Series resistor on 91% · 51 kΩ (10)
VCCpin 2Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (11)
  • Series resistor on 73% · 100 kΩ (8)
EN/SYNCpin 3Connected to: Signal 91%
  • Pull-up to 24V on 82% · 1 MΩ (8), 100 kΩ (1)
BSTpin 4Connected to: Signal 100%
  • Series resistor on 91% · 20 Ω (9), 22 Ω (1)
GNDpin 5Connected to: GND 100%
SWpin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (11)
  • Inductor on 100% · 10 µH (9), 15 µH (1)
INpin 7Connected to: 24V 100%
PGpin 8Connected to: Signal 91%
  • Series resistor on 73% · 100 kΩ (8)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NxtPX4V2 by ArduPilot, VENDETTAFC by Caped-Crussader, NewSkyF7-Air by kuku-199 and Flight controller by andreadamiano.

The MP9943GQ-Z in open source designs

The gallery holds 15 open source boards using the MP9943GQ-Z from 11 GitHub repositories; a typical one measures about 36 × 40 mm and carries around 122 components.

93% use four copper layers or more, and 33% carry an open source license.

The most starred is NxtPX4V2 by ArduPilot.

Microcontrollers on boards using the MP9943GQ-Z

MP9943GQ-Z: common questions

Where can I find a MP9943GQ-Z reference design?

Each of the 15 boards on this page is a real design using the MP9943GQ-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MP9943GQ-Z VCC pin connected?

The VCC pin has a capacitor to GND on 11 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the MP9943GQ-Z.

How is the MP9943GQ-Z SW pin connected?

The SW pin has a series capacitor on 11 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the MP9943GQ-Z.

What resistor goes on the MP9943GQ-Z FB pin?

The FB pin has a series resistor on 10 of 11 designs, most often 51 kΩ. Counted from the KiCad layouts of 11 open source designs using the MP9943GQ-Z.

What parts are used alongside the MP9943GQ-Z?

The AT7456E, BMI088, ICM-42688-P, RT9013-33GB and SN74LVC1G86DCKR appear in the most repositories here.

Which microcontrollers do boards using the MP9943GQ-Z use?

Most are built on STM32 (8) and ESP32 (1).

How big is a typical board using the MP9943GQ-Z?

The median is 36 × 40 mm, and 7% are two-layer designs.

What is the most popular open source board using the MP9943GQ-Z?

By GitHub stars, NxtPX4V2 by ArduPilot, with 244 stars.

Can I simulate one of these boards using the MP9943GQ-Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part