5 open source boards using the SPL06
Real designs built with the SPL06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NxtPX4V2
ArduPilot
33 × 27 mm122 parts4LNo license244STM32
FC AniH743
CosShin
50 × 45 mm124 parts4LMIT0STM32
ArduH743-fc
KingFish233
38 × 38 mm123 parts4LNo license0STM32
NxtPX4V2
HertZhang
33 × 27 mm122 parts4LNo license0SPL06
iNavFlight
11.6 × 10.4 mm7 parts2LNo license11
How designs wire the SPL06
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SPL06 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 4.7 µF).
- The VDD pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 4.7 µF).
- The CSB pin is left unconnected on 5 of 5 designs.
- The SDA pin has a series resistor on 4 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 100% | — |
| CSBpin 2 | Connected to: Not connected 100% | — |
| SDApin 3 | Connected to: The microcontroller 80% |
|
| SCLpin 4 | Connected to: The microcontroller 80% |
|
| VDDIOpin 6 | Connected to: BMI088 80%, RT9013-33GB 80%, SN74LVC1G86DCKR 80% · 3.3V 20% |
|
| VDDpin 8 | Connected to: BMI088 80%, RT9013-33GB 80%, SN74LVC1G86DCKR 80% · 3.3V 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NxtPX4V2 by ArduPilot, SPL06 by iNavFlight, FC AniH743 by CosShin and NxtPX4V2 by HertZhang.
The SPL06 in open source designs
The gallery holds 5 open source boards using the SPL06 from 5 GitHub repositories; a typical one measures about 33 × 27 mm and carries around 122 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is NxtPX4V2 by ArduPilot.
Parts used alongside the SPL06
Microcontrollers on boards using the SPL06
What boards using the SPL06 are built for
SPL06: common questions
Where can I find a SPL06 reference design?
Each of the 5 boards on this page is a real design using the SPL06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SPL06 VDDIO pin connected?
The VDDIO pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the SPL06.
How is the SPL06 VDD pin connected?
The VDD pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the SPL06.
How is the SPL06 CSB pin connected?
The CSB pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the SPL06.
What parts are used alongside the SPL06?
The BMI088, MP9943GQ-Z, RT9013-33GB, SN74LVC1G86DCKR and STM32H743VIH6 appear in the most repositories here.
Which microcontrollers do boards using the SPL06 use?
Most are built on STM32 (4).
How big is a typical board using the SPL06?
The median is 33 × 27 mm, and 20% are two-layer designs.
What is the most popular open source board using the SPL06?
By GitHub stars, NxtPX4V2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the SPL06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.