5 open source boards using the SN74LVC1G86DCKR
Real designs built with the SN74LVC1G86DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NxtPX4V2
ArduPilot
33 × 27 mm122 parts4LNo license244FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063STM32
FC AniH743
CosShin
50 × 45 mm124 parts4LMIT0STM32
ArduH743-fc
KingFish233
38 × 38 mm123 parts4LNo license0STM32
NxtPX4V2
HertZhang
33 × 27 mm122 parts4LNo license0
How designs wire the SN74LVC1G86DCKR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G86DCKR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 100 nF).
- Pin 1 has a resistor to GND on 4 of 5 designs, most often 10 kΩ.
- Pin 2 has a resistor to GND on 4 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: The microcontroller 80% |
|
| Pin 2 | Connected to: A connector 80% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: BMI088 80%, RT9013-33GB 80%, SPL06 80% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NxtPX4V2 by ArduPilot, Hackrf pro by greatscottgadgets, FC AniH743 by CosShin and NxtPX4V2 by HertZhang.
The SN74LVC1G86DCKR in open source designs
The gallery holds 5 open source boards using the SN74LVC1G86DCKR from 5 GitHub repositories; a typical one measures about 38 × 38 mm and carries around 123 components.
100% use four copper layers or more, and 40% carry an open source license.
The most starred is NxtPX4V2 by ArduPilot.
Parts used alongside the SN74LVC1G86DCKR
What boards using the SN74LVC1G86DCKR are built for
SN74LVC1G86DCKR: common questions
Where can I find a SN74LVC1G86DCKR reference design?
Each of the 5 boards on this page is a real design using the SN74LVC1G86DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LVC1G86DCKR VCC pin connected?
The VCC pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G86DCKR.
What resistor goes on the SN74LVC1G86DCKR pin 1?
Pin 1 has a resistor to GND on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G86DCKR.
What resistor goes on the SN74LVC1G86DCKR pin 2?
Pin 2 has a resistor to GND on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G86DCKR.
What parts are used alongside the SN74LVC1G86DCKR?
The BMI088, MP9943GQ-Z, RT9013-33GB, SPL06 and STM32H743VIH6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G86DCKR use?
Most are built on STM32 (4) and FPGA (1).
How big is a typical board using the SN74LVC1G86DCKR?
The median is 38 × 38 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC1G86DCKR?
By GitHub stars, NxtPX4V2 by ArduPilot, with 244 stars.
Can I simulate one of these boards using the SN74LVC1G86DCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.