7 open source boards using the HLK-5M05
Real designs built with the HLK-5M05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Plc board
denorath-sys
100 × 80 mm62 parts4LCERN-OHL-W-2.05ESP32
Smart-Meter
hupfer21
78 × 90 mm129 parts2LNo license1ESP32
Esp32-s3-thermostat box
kenfrew980
100 × 75 mm64 parts2LApache-2.00AVR/Arduino
Automatic-AC-Switch using-PIR-sensor
Manideep136
113.4 × 68.3 mm17 parts2LNo license0ESP32
Test backup
himanshu40304
100 × 30 mm30 parts2LNo license1ESP32
Converter
himanshu40304
100 × 30 mm28 parts2LNo license1ESP32
Converter v9 plot temp
himanshu40304
100 × 30 mm28 parts2LNo license1
How designs wire the HLK-5M05
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HLK-5M05 connects to, and the resistors, capacitors and other passives placed on it.
- The -VOUT_3 pin is tied to GND on 4 of 5 designs.
- The AC/L_1 pin has a series capacitor on 3 of 5 designs, most often 150 nF (then 100 nF).
- The AC/N_2 pin has a series capacitor on 3 of 5 designs, most often 100 nF (then 18 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AC/L_1pin 1 | Connected to: A connector 40% |
|
| AC/N_2pin 2 | Connected to: A connector 60% · GND 20% |
|
| -VOUT_3pin 3 | Connected to: GND 80% · 5V 20% | — |
| +VOUT_4pin 4 | Connected to: 5V 60% · GND 20% · a signal 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Plc board by denorath-sys, Converter by himanshu40304, Smart-Meter by hupfer21 and Esp32-s3-thermostat box by kenfrew980.
The HLK-5M05 in open source designs
The gallery holds 7 open source boards using the HLK-5M05 from 5 GitHub repositories; a typical one measures about 100 × 68.3 mm and carries around 30 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Plc board by denorath-sys.
Parts used alongside the HLK-5M05
Microcontrollers on boards using the HLK-5M05
What boards using the HLK-5M05 are built for
HLK-5M05: common questions
Where can I find a HLK-5M05 reference design?
Each of the 7 boards on this page is a real design using the HLK-5M05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the HLK-5M05 -VOUT_3 pin connected?
The -VOUT_3 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the HLK-5M05.
How is the HLK-5M05 AC/L_1 pin connected?
The AC/L_1 pin has a series capacitor on 3 of 5 designs, most often 150 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the HLK-5M05.
How is the HLK-5M05 AC/N_2 pin connected?
The AC/N_2 pin has a series capacitor on 3 of 5 designs, most often 100 nF (then 18 nF). Counted from the KiCad layouts of 5 open source designs using the HLK-5M05.
Which microcontrollers do boards using the HLK-5M05 use?
Most are built on ESP32 (6) and AVR/Arduino (1).
How big is a typical board using the HLK-5M05?
The median is 100 × 68.3 mm, and 86% are two-layer designs.
What is the most popular open source board using the HLK-5M05?
By GitHub stars, Plc board by denorath-sys, with 5 stars.
Can I simulate one of these boards using the HLK-5M05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.