DevPocket
Hopichek·Projects·ECAD/DevPocket/v0.1/DevPocket.kicad_pcb
About the DevPocket PCB
DevPocket is an open source ESP32 PCB design by Hopichek, published on GitHub. It is a 4-layer board measuring 60 × 70 mm, with 128 components from 33 distinct parts.
Its main chip is the ESP32-WROOM-32UE, from the ESP32 family. Other key parts include the TPS61023DRLR, CP2102GM, USBLC6-2SC6, TP4056-42-ESOP8 and AMS1117-3.3. By type, the board carries 53 resistors, 25 diodes, 25 capacitors, 6 ICs, 6 fuses and 5 connectors.
Main components on the DevPocket
DevPocket bill of materials (BOM)
128 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61023DRLR | SOTFL50P160X60-6N | IC1 |
| 1 | CP2102GM | QFN50P500X500X100-29N-D | IC2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 1 | ESP32-WROOM-32UE | ESP32-WROOM-32U | U5 |
| 3 | BC847 | SOT-23 | Q1, Q2, Q4 |
| 1 | AO3401A | SOT95P280X125-3N | Q3 |
| 1 | mPCIe-FULL | BUS_PCI_Express_Mini_Full | X1 |
| 1 | GSB1C41110SSHR | GSB1C41110SSHR | J1 |
| 1 | Conn_02x15_Top_Bottom | PinSocket_2x15_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x03_Socket | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | S2B-PH-SM4-TB(LF)(SN) S2B-PH-SM4-TB_LF__SN_ | S2BPHSM4TBLFSN | J6 |
| 5 | 0ZCK0100FF2E | FUSC2214X180N | F1, F2, F3, F4, F5 |
| 1 | Fuse | Fuse_0603_1608Metric | F6 |
| 2 | 1825027-8 | 1825027-8 | S1, S2 |
| 21 | UCLAMP3301D.TCT | SOD2613X117N | D1, D2, D3, D4, D5, D6, D7, D8 +13 |
| 4 | WS2812B-2020 | WS28122020 | D22, D23, D24, D25 |
| 1 | IHLP1616ABER1R0M11 | INDPM4441X120N | L1 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.022uF | C_1210_3225Metric | C1 |
| 13 | 100nF | C_0603_1608Metric | C2, C3, C4, C9, C15, C18, C20, C22 +5 |
| 10 | 22uF | C_0805_2012Metric | C5, C7, C10, C11, C12, C13, C17, C19 +2 |
| 1 | 10uF | C_0603_1608Metric | C27 |
| 6 | 5k1 | R_0603_1608Metric | R1, R2, R41, R42, R43, R44 |
| 1 | 1M | R_0805_2012Metric | R3 |
| 21 | 100 | R_0603_1608Metric | R4, R5, R6, R7, R8, R9, R10, R11 +13 |
| 2 | 1k | R_0603_1608Metric | R23, R24 |
| 8 | 10k | R_0603_1608Metric | R25, R26, R28, R33, R36, R40, R45, R46 |
| 4 | 100k | R_0603_1608Metric | R29, R30, R31, R35 |
| 2 | 2k | R_0603_1608Metric | R32, R39 |
| 1 | 732k | R_0603_1608Metric | R34 |
| 8 | 0 | R_0603_1608Metric | R47, R48, R49, R50, R51, R52, R54, R55 |
DevPocket design files
The KiCad project lives in the Hopichek/Projects repository on GitHub; these links point at the commit this page was built from.
DevPocket: common questions
What microcontroller does the DevPocket use?
The DevPocket is built around the ESP32-WROOM-32UE, from the ESP32 family.
How big is the DevPocket PCB?
The DevPocket measures 60 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DevPocket?
128 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the DevPocket design files?
From the Hopichek/Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DevPocket design in my own project?
The repository has no license, so all rights stay with Hopichek. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DevPocket without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Projects
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k