6 open source boards using the ESP32-P4

Real designs built with the ESP32-P4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ESP32-P4

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-P4 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDPST pins have a capacitor to GND on 5 of 6 designs, most often 1 µF (then 100 nF).
  • The VDDPST_4 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF).
  • The VFB/VO4 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The VDDPST_LDO pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 µF).
GPIO7/ADCpin 7Connected to: A connector 50% · not connected 33%
  • Pull-up to 3.3V on 50% · 51 kΩ (2), 10 kΩ (1)
GPIO8/ADCpin 8Connected to: The microcontroller 33% · not connected 33%
  • Pull-up to 3.3V on 50% · 100 kΩ (1), 51 kΩ (1), 10 kΩ (1)
VDDPST_1pin 9Connected to: 3.3V 67% · not connected 33%
  • Decoupling capacitor on 50% · 100 nF (11), 10 µF (1)
GPIO9/ADCpin 10Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 33% · 2.2 kΩ (2)
GPIO10/ADCpin 11Connected to: BMI270 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 2.2 kΩ (2)
GPIO11/ADCpin 12Connected to: A connector 67% · not connected 17%
  • Resistor to GND on 33% · 100 kΩ (2)
GPIO12/ADCpin 13Connected to: A connector 67%, C5180236 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
GPIO13/ADCpin 14Connected to: A connector 67%, C5180236 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
GPIO14/ADCpin 15Connected to: A connector 67% · GND 17%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO16/ADCpin 17Connected to: The microcontroller 33%, a connector 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO17/ADCpin 18Connected to: The microcontroller 33%, a connector 33% · not connected 17%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO18/ADCpin 19Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO19/ADCpin 20Connected to: The microcontroller 33% · not connected 33%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
VDDPST_2pin 21Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (6), 10 µF (1)
GPIO20/ADCpin 22Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO21/ADCpin 23Connected to: Not connected 50% · a signal 50%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
VDD_HP_0pin 26Connected to: 1.2V 50% · a signal 50%
  • Capacitor to GND on 67% · 100 nF (8), 10 µF (1)
  • Inductor on 33% · 2.2 µH (2)
  • Series resistor on 33% · 499 kΩ (2)
  • Series capacitor on 33% · 22 pF (2)
VDDPST_3pin 30Connected to: W25Q128JVS 50% · not connected 17% · VDDO_FLASH 17%
  • Capacitor to GND on 67% · 100 nF (5), 1 µF (3)
  • Series resistor on 33% · 0 Ω (2), 10 kΩ (1)
DSI_REXTpin 34Connected to: Not connected 50% · a signal 50%
  • Resistor to GND on 50% · 4.02 kΩ (3)
VDD_MIPI_DPHYpin 41Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 50% · 100 nF (6), 1 µF (1)
CSI_DATAN0pin 42Connected to: Not connected 67% · a signal 33%
CSI_DATAP0pin 43Connected to: Not connected 67% · a signal 33%
CSI_CLKNpin 45Connected to: Not connected 67% · a signal 33%
CSI_DATAN1pin 46Connected to: Not connected 67% · a signal 33%
CSI_REXTpin 48Connected to: Not connected 50% · a signal 50%
  • Resistor to GND on 33% · 4.02 kΩ (2)
VCCApin 51Connected to: 3.3V 67% · not connected 33%
  • Decoupling capacitor on 67% · 100 nF (8), 10 nF (1)
NCpin 54Connected to: Not connected 100%
GPIO28pin 57Connected to: A connector 67%, ES8156 33%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
GPIO29pin 58Connected to: A connector 67%, ES8156 33%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
VDDPSTpin 59, 67Connected to: Signal 58% · not connected 17% · VDDO_PSRAM 25%
  • Capacitor to GND on 83% · 1 µF (12), 100 nF (8), 10 µF (1)
VDDPST_4pin 62Connected to: 3.3V 67% · not connected 17% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (9), 10 nF (1)
GPIO33pin 64Connected to: Not connected 67% · a signal 33%
GPIO34pin 65Connected to: Not connected 67% · a signal 33%
  • Pull-up to 3.3V on 33% · 51 kΩ (2)
GPIO35pin 66Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (2), 10 kΩ (2)
GPIO36pin 68Connected to: A connector 33% · not connected 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (2), 10 kΩ (2)
VFB/VO1pin 71Connected to: W25Q128JVS 33% · not connected 33% · VDDO_FLASH 17%
  • Capacitor to GND on 67% · 1 µF (4), 100 nF (2)
  • Series resistor on 33% · 0 Ω (2)
VFB/VO2pin 72Connected to: Signal 50% · not connected 33% · VDDO_PSRAM 17%
  • Capacitor to GND on 67% · 1 µF (6), 100 nF (4)
VFB/VO3pin 73Connected to: Signal 50% · not connected 33% · VDDO3 17%
  • Capacitor to GND on 67% · 100 nF (6), 1 µF (2)
VFB/VO4pin 74Connected to: Signal 50% · not connected 17% · VDDO4 33%
  • Capacitor to GND on 83% · 100 nF (5), 1 µF (3), 10 µF (1)
  • Series resistor on 33% · 51 kΩ (5), 10 kΩ (1)
VDDPST_LDOpin 75Connected to: 3.3V 83% · not connected 17%
  • Decoupling capacitor on 83% · 100 nF (10), 10 µF (2)

64 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EAGLE Video Receiver by ISSUIUC, Tanmatsu hardware by Nicolai-Electronics, Soulcore by huming2207 and Why2025 by ranzbak.

The ESP32-P4 in open source designs

The gallery holds 6 open source boards using the ESP32-P4 from 6 GitHub repositories; a typical one measures about 114.9 × 114.9 mm and carries around 171 components.

83% use four copper layers or more, and 17% carry an open source license.

The most starred is EAGLE Video Receiver by ISSUIUC.

Microcontrollers on boards using the ESP32-P4

What boards using the ESP32-P4 are built for

ESP32-P4: common questions

Where can I find a ESP32-P4 reference design?

Each of the 6 boards on this page is a real design using the ESP32-P4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-P4 VDDPST pin connected?

The VDDPST pins have a capacitor to GND on 5 of 6 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the ESP32-P4.

What decoupling capacitors do designs use on the ESP32-P4 VDDPST_4 pin?

The VDDPST_4 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the ESP32-P4.

How is the ESP32-P4 VFB/VO4 pin connected?

The VFB/VO4 pin has a capacitor to GND on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ESP32-P4.

What parts are used alongside the ESP32-P4?

The W25Q128JVS, TLV62569DBV, 74LVC2G02HD4-7, AP3032KTR and BMI270 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-P4 use?

Most are built on ESP32 (6).

How big is a typical board using the ESP32-P4?

The median is 114.9 × 114.9 mm, and 17% are two-layer designs.

What is the most popular open source board using the ESP32-P4?

By GitHub stars, EAGLE Video Receiver by ISSUIUC, with 31 stars.

Can I simulate one of these boards using the ESP32-P4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part