Ricardo-Chad

icl-rocketry·Ricardo-Chad·Hardware/Chad.kicad_pcb

Ricardo-Chad PCB layout, top view — open source ESP32 board by icl-rocketry

About the Ricardo-Chad PCB

Ricardo-Chad is an open source ESP32 PCB design by icl-rocketry, published on GitHub under the MIT license. It is a 4-layer board measuring 30 × 60 mm, with 113 components from 62 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the SN65HVD230, LM66200DRLR, MAX77827AEFD+T, SC4215ASTRT and SiC437BED-T1-GE3. By type, the board carries 42 capacitors, 40 resistors, 7 LEDs, 6 ICs, 5 connectors and 4 diodes.

It belongs with the robotics & motion designs in this gallery.

From the project

Former actuators control board, now a servo control board.

Main components on the Ricardo-Chad

Ricardo-Chad bill of materials (BOM)

113 components, 62 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3
U1
1
SN65HVD230
U2
1
LM66200DRLR
U3
1
MAX77827AEFD+T
U4
1
SC4215ASTRT
U5
1
SiC437BED-T1-GE3
SiC437AED-T1
U6
1
SSM3K15AMFV,L3F
Q1
1
R940000171
Y1
1
RBUS
J1
1
GPIO Breakout
J2
1
SERVOCH0
ServoCH0
J3
1
SERVOCH1
ServoCH1
J4
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J5
2
CONN_01X02_MALE
Conn_01x02_Male
BOOTJUMPER1, ENJUMPER1
1
TermJP
JP1
1
BLUE_LED
3V3LED1
1
RED_LED
12VLED1
2
AMBER_LED
CANRXLED1, SERVOLED1
2
GREEN_LED
CANTXLED1, TXLED1
1
WHITE_LED
USBLED1
Show 42 more
QtyPartRefs
1
SM712_SOT23
D1
1
SP0503BAHT
D2
1
~
D3
1
RCLAMP3346PQTNT
D4
1
2.0NH
2.0nH
L1
1
20NH
20nH
L2
1
DFE201210U-1R0M
1uH
L3
1
SPM10065VT-3R3M-D
3.3uH
L4
5
10UF
10uF
C1, C16, C20, C24, C26
5
1UF
1uF
C2, C4, C7, C22, C28
9
0.1UF
0.1uF
C3, C5, C6, C8, C10, C11, C27, C39 +1
1
10NF
10nF
C9
2
11PF
11pF
C13, C14
2
100NF
100nF
C15, C38
1
47NF
47nF
C17
1
160PF
160pF
C18
5
47uF
C19, C31, C40, C46, C48
1
10UF
10uF
C21
1
22UF
22uF
C23
2
4.7UF
4.7uF
C25, C29
2
T52M1107M035C0100
100uF
C30, C32
5
47UF
47uF
C33, C35, C37, C47, C49
7
10K
10k
R1, R3, R14, R17, R18, R20, R38
3
470
R2, R4, R37
1
AC0402FR-07499RL
499
R6
1
3k
R7
1
0
R8
2
60
R9, R10
3
5.1K
5.1k
R11, R12, R13
1
14K
14k
R15
1
56K
56k
R16
1
ERJ-2RKF1133X
113k
R19
1
2.2
R21
1
200K
200k
R22
1
100K
100k
R23
1
ERJ-2RKF4423X
442k
R24
4
1k
R25, R26, R27, R39
6
10k
R28, R29, R30, R31, R32, R33
1
18K
18k
R34
1
1.5K
1.5k
R36
2
RK73H1ETTP1650F
165R
R40, R41
1
5.1R
R42

Ricardo-Chad design files

The KiCad project lives in the icl-rocketry/Ricardo-Chad repository on GitHub; these links point at the commit this page was built from.

Ricardo-Chad: common questions

What microcontroller does the Ricardo-Chad use?

The Ricardo-Chad is built around the ESP32-S3, from the ESP32 family.

How big is the Ricardo-Chad PCB?

The Ricardo-Chad measures 30 × 60 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Ricardo-Chad?

113 components, from 62 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ricardo-Chad design files?

From the icl-rocketry/Ricardo-Chad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ricardo-Chad design in my own project?

Yes, under the terms of its MIT license, which icl-rocketry chose for the repository.

Can I test firmware for the Ricardo-Chad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards