3 open source boards using the SiC437BED-T1-GE3
Real designs built with the SiC437BED-T1-GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Ricardo-Stark
icl-rocketry
117 × 49 mm298 parts6LNo license0ESP32
Ricardo-LightningMcQueen
icl-rocketry
59 × 50 mm135 parts4LNo license0ESP32
Ricardo-Chad
icl-rocketry
30 × 60 mm113 parts4LMIT0
The SiC437BED-T1-GE3 in open source designs
The gallery holds 3 open source boards using the SiC437BED-T1-GE3 from 3 GitHub repositories; a typical one measures about 59 × 50 mm and carries around 135 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Ricardo-Stark by icl-rocketry.
Parts used alongside the SiC437BED-T1-GE3
Microcontrollers on boards using the SiC437BED-T1-GE3
What boards using the SiC437BED-T1-GE3 are built for
SiC437BED-T1-GE3: common questions
Where can I find a SiC437BED-T1-GE3 reference design?
Each of the 3 boards on this page is a real design using the SiC437BED-T1-GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SiC437BED-T1-GE3?
The ESP32-S3, MAX77827AEFD+T, SN65HVD230, LM66200DRLR and SC4215 appear in the most repositories here.
Which microcontrollers do boards using the SiC437BED-T1-GE3 use?
Most are built on ESP32 (3).
How big is a typical board using the SiC437BED-T1-GE3?
The median is 59 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the SiC437BED-T1-GE3?
By GitHub stars, Ricardo-Stark by icl-rocketry, with 0 stars.
Can I simulate one of these boards using the SiC437BED-T1-GE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.