Ricardo-BlackBoxNEWFinal
About the Ricardo-BlackBoxNEWFinal PCB
Ricardo-BlackBoxNEWFinal is an open source ESP32 PCB design by icl-rocketry, published on GitHub. It is a 4-layer board measuring 62 × 32 mm, with 63 components from 39 distinct parts.
Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the XTSD08GLGEAG, SN65HVD230, LM66200DRLR, MAX77827AEFD+T and SC4215. By type, the board carries 27 capacitors, 16 resistors, 6 ICs, 3 inductors, 2 connectors and 2 diodes.
From the project
Flight Data Recorder (FDR) for ICLR flight vehicles
Main components on the Ricardo-BlackBoxNEWFinal
Ricardo-BlackBoxNEWFinal bill of materials (BOM)
63 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XTSD08GLGEAG | SON127P800X600X95-8N | IC1 |
| 1 | ESP32-S3 | QFN40P700X700X90-57N | U1 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LM66200DRLR | SOTFL50P160X60-8N | U3 |
| 1 | MAX77827AEFD+T | CONV_MAX77827AEFD+T | U4 |
| 1 | SC4215 | SOIC127P599X175-9N | U5 |
| 1 | 40MHz±10ppm | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | RBUS | Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J2 |
| 1 | BLUE_LED | R_0402_1005Metric | 3V3LED1 |
| 2 | CONN_01X02_MALE Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | BOOTJUMPER1, ENJUMPER1 |
| 1 | TermJP | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | GREEN_LED | R_0402_1005Metric | TXLED1 |
| 1 | USB_LED | R_0402_1005Metric | USBLED1 |
| 1 | SM712_SOT23 | SOT-23 | D1 |
| 1 | SP0503BAHT | SOT-143 | D2 |
| 1 | 2.0NH 2.0nH | L_0402_1005Metric | L1 |
| 1 | 20NH 20nH | L_0402_1005Metric | L2 |
| 1 | 1UH 1uH | L_0805_2012Metric | L3 |
| 6 | 10UF 10uF | C_0402_1005Metric | C1, C16, C20, C24, C26, C28 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1UF 1uF | C_0402_1005Metric | C2, C4, C7, C22 |
| 8 | 0.1UF 0.1uF | C_0402_1005Metric | C3, C5, C6, C8, C10, C11, C27, C29 |
| 1 | 10NF 10nF | C_0402_1005Metric | C9 |
| 1 | DNP | C_0402_1005Metric | C12 |
| 2 | 11PF 11pF | C_0402_1005Metric | C13, C14 |
| 1 | 100NF 100nF | C_0402_1005Metric | C15 |
| 1 | 47NF 47nF | C_0402_1005Metric | C17 |
| 1 | 10UF 10uF | C_0603_1608Metric | C21 |
| 1 | 22UF 22uF | C_0603_1608Metric | C23 |
| 1 | 4.7UF 4.7uF | C_0402_1005Metric | C25 |
| 4 | 10K 10k | R_0402_1005Metric | R1, R3, R14, R17 |
| 3 | 470 | R_0402_1005Metric | R2, R4, R13 |
| 1 | DNP | R_0402_1005Metric | R5 |
| 1 | 499 | R_0402_1005Metric | R6 |
| 1 | 0 | R_0603_1608Metric | R8 |
| 2 | 60 | R_0603_1608Metric | R9, R10 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R11, R12 |
| 1 | 14K 14k | R_0402_1005Metric | R15 |
| 1 | 56K 56k | R_0402_1005Metric | R16 |
Ricardo-BlackBoxNEWFinal design files
The KiCad project lives in the icl-rocketry/Ricardo-JollyRoger repository on GitHub; these links point at the commit this page was built from.
Ricardo-BlackBoxNEWFinal: common questions
What microcontroller does the Ricardo-BlackBoxNEWFinal use?
The Ricardo-BlackBoxNEWFinal is built around the ESP32-S3, from the ESP32 family.
How big is the Ricardo-BlackBoxNEWFinal PCB?
The Ricardo-BlackBoxNEWFinal measures 62 × 32 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Ricardo-BlackBoxNEWFinal?
63 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ricardo-BlackBoxNEWFinal design files?
From the icl-rocketry/Ricardo-JollyRoger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ricardo-BlackBoxNEWFinal design in my own project?
The repository has no license, so all rights stay with icl-rocketry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ricardo-BlackBoxNEWFinal without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Ricardo-JollyRoger
ESP32Ricardo-BlackBox
80.3 × 54.1 mm69 parts4LNo license0
ESP32Ricardo-BlackBoxNEW
49.9 × 46.6 mm69 parts4LNo license0
ESP32NewRicardBlackBox
124.7 × 36.8 mm65 parts4LNo license0
ESP32RicardoTemplate
127 × 36.8 mm65 parts2LNo license0
ESP32RicardoBlackBox
47.1 × 50.6 mm55 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k