16 open source boards using the SC4215

Real designs built with the SC4215, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the SC4215

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SC4215 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 7 of 8 designs, most often 22 µF (then 4.7 µF).
  • The VIN pin has a capacitor to GND on 7 of 8 designs, most often 22 µF (then 4.7 µF).
  • The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
  • The ADJ pin has a pull-up to 3.3V on 7 of 7 designs, most often 56 kΩ.
PGOODpin 1Connected to: Not connected 88%
ENpin 2Connected to: MAX77827AEFD+T 75%
  • Capacitor to GND on 88% · 22 µF (11), 4.7 µF (7), 10 µF (6)
VINpin 3Connected to: MAX77827AEFD+T 75%
  • Capacitor to GND on 88% · 22 µF (11), 4.7 µF (7), 10 µF (6)
VDDpin 4Connected to: Not connected 100%
OUTpin 5Connected to: Not connected 88%
VOUTpin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (8), 10 µF (7), 1 µF (1)
ADJpin 7Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 56 kΩ (7)
  • Resistor to GND on 100% · 10 kΩ (7)
GNDpin 8, 9Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PickleRick by icl-rocketry, Артёмитер by icl-rocketry, Ricardo-FlintandSteel by icl-rocketry and NewRicardBlackBox by icl-rocketry.

The SC4215 in open source designs

The gallery holds 16 open source boards using the SC4215 from 8 GitHub repositories; a typical one measures about 60 × 37 mm and carries around 80 components.

88% use four copper layers or more, and 19% carry an open source license.

The most starred is PickleRick by icl-rocketry.

Microcontrollers on boards using the SC4215

What boards using the SC4215 are built for

SC4215: common questions

Where can I find a SC4215 reference design?

Each of the 16 boards on this page is a real design using the SC4215. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SC4215 EN pin connected?

The EN pin has a capacitor to GND on 7 of 8 designs, most often 22 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the SC4215.

How is the SC4215 VIN pin connected?

The VIN pin has a capacitor to GND on 7 of 8 designs, most often 22 µF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the SC4215.

What decoupling capacitors do designs use on the SC4215 VOUT pin?

The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the SC4215.

What parts are used alongside the SC4215?

The ESP32-S3, MAX77827AEFD+T, SN65HVD230, LM66200DRLR and INA219AxDCN appear in the most repositories here.

Which microcontrollers do boards using the SC4215 use?

Most are built on ESP32 (16).

How big is a typical board using the SC4215?

The median is 60 × 37 mm, and 13% are two-layer designs.

What is the most popular open source board using the SC4215?

By GitHub stars, PickleRick by icl-rocketry, with 2 stars.

Can I simulate one of these boards using the SC4215 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part