7-segment dice
inoffensiveLama·7-segment-dice·PCB Files/7 Segment Dice.kicad_pcb
About the 7-segment dice PCB
7-segment dice is an open source ESP32 PCB design by inoffensiveLama, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68 × 52 mm, with 35 components from 9 distinct parts.
Its main chip is the ESP32-S3_SUPERMINI, from the ESP32 family. Other key parts include the GS5611-2 7SegDisp 0,56inch, 74HC165 and 74HC595. By type, the board carries 24 resistors, 6 ICs, 3 capacitors and 2 switches.
It belongs with the displays & leds designs in this gallery.
From the project
A digital dice using shift-register daisy-chaining and custom PCB design. Also it uses 7 segment displays, in case you didn't realize from the name.
A digital dice using shift-register daisy-chaining and custom PCB design. Also it uses 7 segment displays, in case you didn't realize from the name.
- Uses 74HC595 and 74HC165 shift registers to minimize GPIO usage (only 6 pins to control 24+ I/O points) - Custom PCB designed in KiCad and manufactured with JLCPCB - Bitwise logic using a dipswitch and the shift register

Main components on the 7-segment dice
7-segment dice bill of materials (BOM)
35 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | GS5611-2 7SegDisp 0,56inch | SMD 7 Segment Display 0.56 Inch | U1, U2 |
| 1 | ESP32-S3_SUPERMINI | MODULE_ESP32-C3_SUPERMINI_TH | U3 |
| 1 | 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 2 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 1 | SW_DIP_x08 | SW_DIP_SPSTx08_Slide_6.7x21.88mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | SW_Push | SW_Cherry_MX_1.00u_Plate | SW2 |
| 3 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 16 | 220R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
| 8 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20, R21, R22, R23, R24 |
7-segment dice design files
The KiCad project lives in the inoffensiveLama/7-segment-dice repository on GitHub; these links point at the commit this page was built from.
7-segment dice: common questions
What microcontroller does the 7-segment dice use?
The 7-segment dice is built around the ESP32-S3_SUPERMINI, from the ESP32 family.
How big is the 7-segment dice PCB?
The 7-segment dice measures 68 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 7-segment dice?
35 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the 7-segment dice design files?
From the inoffensiveLama/7-segment-dice repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 7-segment dice design in my own project?
Yes, under the terms of its GPL-3.0 license, which inoffensiveLama chose for the repository.
Can I test firmware for the 7-segment dice without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k