UPS
About the UPS PCB
UPS is an open source PCB design by IoTCloudStudio, published on GitHub. It is a 2-layer board measuring 79.6 × 51.3 mm, with 33 components from 24 distinct parts.
Other key parts include the PC817 and NE555. By type, the board carries 10 diodes, 8 resistors, 3 transistors, 2 ICs, 2 relays and 2 capacitors.
It belongs with the power & battery designs in this gallery.
Main components on the UPS
UPS bill of materials (BOM)
33 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PC817 | DIP-4_W7.62mm | U1 |
| 1 | NE555 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | IRF540N | TO-220-3_Vertical | Q1 |
| 2 | BC548 | TO-92_Inline | Q2, Q3 |
| 1 | 220v | TerminalBlock_bornier-3_P5.08mm | j1 |
| 1 | 12V | TerminalBlock_bornier-3_P5.08mm | IN1 |
| 1 | G5V-2 | Relay_DPDT_Omron_G5V-2 | K1 |
| 1 | SANYOU_SRD_Form_C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K2 |
| 1 | BAT | TerminalBlock_bornier-3_P5.08mm | OUT1 |
| 2 | R_POT_TRIM | Potentiometer_Bourns_3386P_Vertical | RV1, RV2 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SET1 |
| 1 | W10G | Diode_Bridge_Round_D9.8mm | D1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D6, D10 |
| 2 | 1N5408 | D_DO-201AD_P15.24mm_Horizontal | D3, D4 |
| 1 | VERDE | LED_D3.0mm_IRBlack | D5 |
| 1 | ROJO | LED_D3.0mm_IRBlack | D7 |
| 2 | D_Zener | D_DO-35_SOD27_P7.62mm_Horizontal | D8, D9 |
| 1 | 100 Nf | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1 |
| 1 | 100nF | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C2 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 2K2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2, R7, R8 |
| 1 | 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R3 |
| 2 | 68K | R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R4, R5 |
| 1 | 180 | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R6 |
UPS design files
The KiCad project lives in the IoTCloudStudio/HW_Develop repository on GitHub; these links point at the commit this page was built from.
UPS: common questions
How big is the UPS PCB?
The UPS measures 79.6 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UPS?
33 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the UPS design files?
From the IoTCloudStudio/HW_Develop repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the UPS design in my own project?
The repository has no license, so all rights stay with IoTCloudStudio. Use it as a reference, and ask the author before reusing the design.
More boards in HW_Develop
Pcb regulador solar V1.0
361.6 × 135.4 mm187 parts2LNo license1
ESP8266Tesseract
100 × 100 mm87 parts2LNo license1
ESP32UPSV2concepttocheck
135.3 × 51 mm65 parts2LNo license1
ESP8266PCB control acceso
100.3 × 50 mm50 parts2LNo license1
ESP8266Alarma com
169.3 × 112 mm44 parts2LNo license1
ESP8266RFW26
100 × 50 mm41 parts2LNo license1
ESP8266RFW26 2Capas
80 × 45 mm40 parts2LNo license1
UPS-BK-bk
90.2 × 45.7 mm40 parts2LNo license1
ESP32RFID FDX Reader
150 × 100 mm6 parts2LNo license1
Prueba
66 × 52 mm6 parts2LNo license1
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k