HardLabs

RFID FDX Reader

IoTCloudStudio·HW_Develop·Testing/Caravana RFID/Lector_RFID_FDX_Caravana/KiCad/RFID_FDX_Reader.kicad_pcb

RFID FDX Reader PCB layout, top view — open source ESP32 board by IoTCloudStudio

About the RFID FDX Reader PCB

RFID FDX Reader is an open source ESP32 PCB design by IoTCloudStudio, published on GitHub. It is a 2-layer board measuring 150 × 100 mm, with 6 components from 6 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the LM358. By type, the board carries 2 ICs, 2 capacitors, 1 inductor and 1 resistor.

It belongs with the iot & wireless and displays & leds designs in this gallery.

Main components on the RFID FDX Reader

ESP32-WROOM-32LM358

RFID FDX Reader bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
LM358
U2
1
120µH
L1
1
100nF
C1
1
22nF
C2
1
1.6kΩ
R3

RFID FDX Reader design files

The KiCad project lives in the IoTCloudStudio/HW_Develop repository on GitHub; these links point at the commit this page was built from.

RFID FDX Reader: common questions

What microcontroller does the RFID FDX Reader use?

The RFID FDX Reader is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the RFID FDX Reader PCB?

The RFID FDX Reader measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RFID FDX Reader?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the RFID FDX Reader design files?

From the IoTCloudStudio/HW_Develop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RFID FDX Reader design in my own project?

The repository has no license, so all rights stay with IoTCloudStudio. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RFID FDX Reader without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in HW_Develop

Similar boards