23 open source boards using the 74HC4040

Real designs built with the 74HC4040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the 74HC4040

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74HC4040 connects to, and the resistors, capacitors and other passives placed on it.

  • The Q11 pin is left unconnected on 9 of 10 designs.
  • The Q10 pin is left unconnected on 8 of 10 designs (a signal on 2).
  • The VDD pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF.
  • The Q9 pin is left unconnected on 7 of 10 designs (a signal on 3).
Q11pin 1Connected to: Not connected 90%
Q5pin 2Connected to: Signal 70% · not connected 30%
  • Series resistor on 30% · 1 kΩ (1), 470 Ω (1), 0 Ω (1)
Q4pin 3Connected to: A connector 20% · not connected 20%
  • Series resistor on 30% · 1 kΩ (1), 470 Ω (1), 0 Ω (1)
Q6pin 4Connected to: Signal 70% · not connected 30%
  • Series resistor on 30% · 1 kΩ (1), 470 Ω (1), 0 Ω (1)
VSSpin 8Connected to: GND 100%
Q7pin 13Connected to: Signal 60% · not connected 40%
  • Series resistor on 30% · 1 kΩ (1), 470 Ω (1), 0 Ω (1)
Q9pin 14Connected to: Not connected 70% · a signal 30%
Q10pin 15Connected to: Not connected 80% · a signal 20%
VDDpin 16Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (6)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jupiter-II by ricaflops, Pico vdu by zuiko21, 8 16 computer 2 by halfburnttoast and TIM-011B by Board-Folk.

The 74HC4040 in open source designs

The gallery holds 23 open source boards using the 74HC4040 from 10 GitHub repositories; a typical one measures about 177.8 × 100 mm and carries around 122 components.

86% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.

The most starred is Jupiter-II by ricaflops.

Microcontrollers on boards using the 74HC4040

What boards using the 74HC4040 are built for

74HC4040: common questions

Where can I find a 74HC4040 reference design?

Each of the 23 boards on this page is a real design using the 74HC4040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC4040 Q11 pin connected?

The Q11 pin is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 74HC4040.

How is the 74HC4040 Q10 pin connected?

The Q10 pin is left unconnected on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the 74HC4040.

What decoupling capacitors do designs use on the 74HC4040 VDD pin?

The VDD pin has a decoupling capacitor on 6 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the 74HC4040.

What parts are used alongside the 74HC4040?

The 74HC157, 74HC74, 74HC138, 74HC245 and 74HC574 appear in the most repositories here.

Which microcontrollers do boards using the 74HC4040 use?

Most are built on Raspberry Pi (3) and AVR/Arduino (1).

How big is a typical board using the 74HC4040?

The median is 177.8 × 100 mm, and 86% are two-layer designs.

What is the most popular open source board using the 74HC4040?

By GitHub stars, Jupiter-II by ricaflops, with 43 stars.

Can I simulate one of these boards using the 74HC4040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part