Nsumo hardware main
Jason-sketch729·nsumo_hardware-main
About the Nsumo hardware main PCB
Nsumo hardware main is an open source TI MSP430/CC PCB design by Jason-sketch729, published on GitHub. It is a 2-layer board measuring 50 × 65 mm, with 73 components from 55 distinct parts.
Its main chip is the MSP430G2553IPW28, from the TI MSP430/CC family. Other key parts include the TSOP382xx, MP2359, TB6612FNG, C6186 and RS3E075AT. By type, the board carries 21 connectors, 16 resistors, 15 capacitors, 9 diodes, 7 ICs and 2 fuses.
From the project
nsumo_hardware-main
hardware_nsumo-main is a project containing 54 files.
Main components on the Nsumo hardware main
Nsumo hardware main bill of materials (BOM)
73 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSOP382xx | Vishay_MINICAST-3Pin | U1 |
| 1 | MP2359 | TSOT-23-6 | U2 |
| 2 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm_LongPads | U3, U6 |
| 1 | MSP430G2553IPW28 | TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | C6186 AMS1117-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | RS3E075AT | SOP-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | Range_sensor_left | Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J1 |
| 1 | Range_sensor_front | Molex_PicoBlade_53048-0610_1x06_P1.25mm_Horizontal | J2 |
| 1 | BattConn1 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | Range_sensor_front_left | Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J4 |
| 1 | BattConn0 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J5 |
| 1 | I2C | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Range_sensor_front_right | Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J7 |
| 1 | UNUSED | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Range_sensor_right | Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J9 |
| 1 | UART | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | SWD | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | LED | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | PWR | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | MOT_FRONT_RIGHT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizont | J14 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOT_BACK_RIGHT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizont | J15 |
| 1 | MOT_FRONT_LEFT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizont | J16 |
| 1 | MOT_BACK_LEFT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizont | J17 |
| 1 | Ld_front_left | Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | J19 |
| 1 | Ld_back_left | Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | J20 |
| 1 | Ld_front_right | Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | J21 |
| 1 | Ld_back_right | Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | J22 |
| 2 | 750mA | Fuse_1206_3216Metric | F1, F2 |
| 1 | SW_DPST_x2 | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SW_SPST | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 5 | C2286 RED | LED_0603_1608Metric | D1, D5, D7, D8, D9 |
| 1 | C72043 GREEN | LED_0603_1608Metric | D2 |
| 1 | C72038 YELLOW | LED_0603_1608Metric | D3 |
| 1 | C8598 B5819W | D_SOD-123 | D4 |
| 1 | C72041 BLUE | LED_0603_1608Metric | D6 |
| 1 | C408412 10uH | L_Sunlord_MWSA0518_5.4x5.2mm | L1 |
| 3 | C19702 10uF | C_0805_2012Metric | C1, C13, C14 |
| 1 | C28323 1uF | C_0805_2012Metric | C2 |
| 1 | C96123 47uF | C_1206_3216Metric | C3 |
| 1 | C1710 10nF | C_0805_2012Metric | C4 |
| 1 | C1588 1nF | C_0603_1608Metric | C5 |
| 1 | C19702 10uF | C_0603_1608Metric | C6 |
| 1 | C28323 1uF | C_0603_1608Metric | C7 |
| 1 | C14663 100nF | C_0603_1608Metric | C8 |
| 4 | C49678 0.1uF | C_0805_2012Metric | C9, C10, C11, C12 |
| 1 | C45783 22uF | C_0805_2012Metric | C15 |
| 1 | C25819 47k | R_0603_1608Metric | R1 |
| 1 | C25271 1 | R_0805_2012Metric | R2 |
| 1 | C17407 100k | R_0805_2012Metric | R3 |
| 2 | C17710 470 | R_0805_2012Metric | R4, R5 |
| 2 | C17513 1k | R_0805_2012Metric | R6, R7 |
| 2 | C17902 10k | R_1206_3216Metric | R8, R9 |
| 5 | C17408 100 | R_0805_2012Metric | R10, R11, R13, R14, R16 |
| 1 | C17719 49.9k | R_0805_2012Metric | R12 |
| 1 | 9.53k | R_0805_2012Metric | R15 |
Nsumo hardware main design files
The KiCad project lives in the Jason-sketch729/nsumo_hardware-main repository on GitHub; these links point at the commit this page was built from.
Nsumo hardware main: common questions
What microcontroller does the Nsumo hardware main use?
The Nsumo hardware main is built around the MSP430G2553IPW28, from the TI MSP430/CC family.
How big is the Nsumo hardware main PCB?
The Nsumo hardware main measures 50 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nsumo hardware main?
73 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nsumo hardware main design files?
From the Jason-sketch729/nsumo_hardware-main repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Nsumo hardware main design in my own project?
The repository has no license, so all rights stay with Jason-sketch729. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nsumo hardware main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
Similar boards
TI MSP430/CC
Pluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0536TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089TI MSP430/CC
Toniebox
toniebox-reverse-engineering
88 × 102 mm11 parts2LNo license36TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33TI MSP430/CC
Elektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029TI MSP430/CC
MSP430 Breadstick - Apple Sauce
upsidedownlabs
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021