2 open source boards using the RS3E075AT

Real designs built with the RS3E075AT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The RS3E075AT in open source designs

The gallery holds 2 open source boards using the RS3E075AT from 2 GitHub repositories; a typical one measures about 50 × 65 mm and carries around 73 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Nsumo hardware by artfulbytes.

Microcontrollers on boards using the RS3E075AT

What boards using the RS3E075AT are built for

RS3E075AT: common questions

Where can I find a RS3E075AT reference design?

Each of the 2 boards on this page is a real design using the RS3E075AT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the RS3E075AT?

The C6186, MP2359, MSP430G2553IPW28, TB6612FNG and TSOP382xx appear in the most repositories here.

Which microcontrollers do boards using the RS3E075AT use?

Most are built on TI MSP430/CC (2).

How big is a typical board using the RS3E075AT?

The median is 50 × 65 mm, and 100% are two-layer designs.

What is the most popular open source board using the RS3E075AT?

By GitHub stars, Nsumo hardware by artfulbytes, with 33 stars.

Can I simulate one of these boards using the RS3E075AT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part