Verificationator GP-WS25-26

jcchincheong-bb·Verificationator_GP-WS25-26·2.3 Circuit Diagram/Inoovatest_Subsystems/Inoovatest_Sub.kicad_pcb

Verificationator GP-WS25-26 PCB layout, top view — open source ESP32 board by jcchincheong-bb

About the Verificationator GP-WS25-26 PCB

Verificationator GP-WS25-26 is an open source ESP32 PCB design by jcchincheong-bb, published on GitHub. It is a 2-layer board measuring 120 × 100 mm, with 111 components from 65 distinct parts.

Its main chip is the ESP32-P4, from the ESP32 family. Other key parts include the MCP73223, MAX6126A30+T, AD8421, OPA188 and ADS127L21. By type, the board carries 41 capacitors, 36 resistors, 14 ICs, 6 transistors, 4 diodes and 4 inductors.

From the project

Files for Group Project WS2526

This project was done as part of the Group Project Module at HSRW in WS25/26. It was done under requirements provided by Innovatest.

The Verificationator project is focused on the design of a highly portable, robust, and user-friendly solution that allows technicians to verify and calibrate hardness testers directly in the field. The project’s scope spans from the concept design to the project documentation and the design of an interactive brochure. The project spanned from October 5th, 2025, to January 13th, 2026. Five engineering students make up the interdisciplinary design team, and the…

Verificationator GP-WS25-26, from the project README
From the project README

Main components on the Verificationator GP-WS25-26

MCP73223MAX6126A30+TAD8421OPA188ADS127L21MCP41U83MOC 8102 OptocouplerTPS61170TPS62130TPS61099TPS61089W25Q128JVSESP32-P4TouchScreen/SPI Touch Controller

Verificationator GP-WS25-26 bill of materials (BOM)

111 components, 65 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP73223
IC1
1
MAX6126A30+T
MAX6126
IC2
1
AD8421
U1
1
OPA188
U2
1
ADS127L21
U3
1
MCP41U83
U4
1
MOC 8102 Optocoupler
U5
1
TPS61170
U6
1
TPS62130
U7
1
TPS61099
U8
1
TPS61089
U9
1
W25Q128JVS
U10
1
ESP32-P4
U11
1
TouchScreen/SPI Touch Controller
U12
3
AO3401A
Q1, Q2, Q5
3
AO3400A
Q3, Q4, Q6
1
M12 5-pin
J1
1
USB_A
J2
1
USB_C Charging port
J3
1
Battery Terminal
BT1
Show 45 more
QtyPartRefs
1
Emergency Stop
SW1
1
ON/OFF
SW2
1
SMF5V0A
D1
1
Bi-color LED
D2
2
D_Schottky
D3, D4
1
4.7 uH
L1
1
2.2uH
L2
1
4.7uH
L3
1
4.7 uH
L4
2
100uF
C1, C23
12
0.1uF
C2, C4, C5, C6, C8, C10, C13, C15 +4
1
1uF
C3
12
10uF
C7, C9, C11, C12, C24, C25, C26, C28 +4
1
3.3uF
C14
1
4.7uF
C16
1
0.33uF
C17
1
0.47uF
C18
1
10pF
C21
1
10nF
C22
1
3.3nF
C29
5
22uF
C30, C31, C32, C36, C39
1
2.2uF
C38
1
0.1F
C40
2
5.1kΩ
R1, R2
1
500kΩ
R3
2
100kΩ
R4, R17
1
200kΩ
R5
12
10kΩ
R6, R9, R10, R12, R13, R15, R20, R24 +4
1
100 Ω
R7
1
4.7kΩ
R8
1
4.99kΩ
R11
1
1.2kΩ
R14
1
1kΩ
R16
1
1MΩ
R18
1
71.4 kΩ
R19
1
10 kΩ
R21
1
100 kΩ
R22
1
31.25kΩ
R23
1
301kΩ
R27
1
40 kΩ
R28
1
4.87 kΩ
R29
2
10 kΩ
R30, R31
1
17.4kΩ
R32
1
127kΩ
R33
1
20kΩ
R36

Verificationator GP-WS25-26 design files

The KiCad project lives in the jcchincheong-bb/Verificationator_GP-WS25-26 repository on GitHub; these links point at the commit this page was built from.

Verificationator GP-WS25-26: common questions

What microcontroller does the Verificationator GP-WS25-26 use?

The Verificationator GP-WS25-26 is built around the ESP32-P4, from the ESP32 family.

How big is the Verificationator GP-WS25-26 PCB?

The Verificationator GP-WS25-26 measures 120 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Verificationator GP-WS25-26?

111 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Verificationator GP-WS25-26 design files?

From the jcchincheong-bb/Verificationator_GP-WS25-26 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Verificationator GP-WS25-26 design in my own project?

The repository has no license, so all rights stay with jcchincheong-bb. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Verificationator GP-WS25-26 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards